Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam X8 Intro to Multiaxis eCourse

Buy Now
149.00 995.00

The Mastercam X8 Multiaxis eCourse is intended for the advanced Mastercam user looking to learn Mastercam Multiaxis programming. A firm grasp on both 2D and 3D machining is required and can be attained by completing the Mill Level 1 and Mill Level 3 Training Tutorials or eCourses.

The Intro to Multiaxis eCourse covers the different applications that are available by configuring the Rotary Axis Control page including: Rotary axis positioning and Axis substitution. It also covers the Multiaxis Classic family toolpaths: Rotary, Curve, Swarf, Flow, and Msurf. A special tutorial is dedicated to teaching how to drill and circle mill holes using Multiaxis toolpaths. Specific parameters such as Cut patterns, Tool Axis Control, Limits, Collision Control, Linking and more are described in detail.

The contents also describe how to verify the toolpaths using the new Machine Simulation module that combines toolpath backplot mode and material removal mode with collision detections.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 10 hours to complete.

Note: The free home learning edition/demo software for this course has expired. You can still watch the videos and read the eBook but you will not be able to follow along unless you own a licensed version of Mastercam.

Introduction
  1. Mastercam Workspace
    3:33
Tutorial 1
  1. Tutorial 1 covers Contour With Axis Substitution.

  2. 5 - Axis Substitution About Y Axis
    2:14
  3. 4 - Create the Conical Helix Geometry
    0:35
  4. 3 - Axis Substitution About Y Axis
    5:10
  5. 2. Select the Machine and Stock Setup
    0:59
  6. 1. Create the Cylindrical Helix Geometry
    1:32
Tutorial 2
  1. Tutorial 2 covers Drilling With Axis Substitution and Rotary Axis Positioning & Transform Rotate toolapths.

  2. 2 - Axis Substitution - Drilling Toolpath
    1:49
  3. 3 - Rotary Axis Positioning - Drilling Toolpath
    2:05
  4. 4 - Axis Substitution - Contour Toolpath
    2:41
  5. 5 - Slot Machining - Contour Toolpath
    1:59
  6. 1 - Open the File and Setup Stock
    0:43
  7. 6 - Transform Rotate the Contour Toolpath
    2:29
Tutorial 3
  1. Tutorial 3 covers Rolldie C-Hook.

  2. 1 - Open the File and Setup Stock
    1:41
  3. 2 - Axis Substitution - Contour Toolpath
    4:32
  4. 3 - RollDie C-Hook Toolpath
    6:29
Tutorial 4
  1. Tutorial 4 covers Contour Indexing Using Planes.

  2. 1 - Open the File and Setup Stock
    0:55
  3. 2 - Axis Substitution Contour Toolpath
    3:32
  4. 3 - Define a New Plane to Drill
    2:04
  5. 4 - Transform Rotate the Rest of the Holes
    1:55
  6. 5 - Machine the Slot in Top Plane
    2:31
  7. 6 - Machine the Bigger Slot in New Tool Plane
    3:15
Tutorial 5
  1. Tutorial 5 covers Rotary 4-Axis.

  2. 3. Rotary 4-Axis with Axial Cut
    5:32
  3. 1. Open the File and Setup Stock
    1:03
  4. 2. Rotary 4-Axis with Rotary Cut
    5:59
Tutorial 6
  1. Tutorial 6 covers Curve 5-Axis.

  2. 1 - Open the File and Setup Stock
    1:19
  3. 2 - Curve with Tool Axis Oriented to a Point
    6:16
  4. 3 - Curve with Tool Axis Oriented from a Point
    3:34
  5. 4 - Curve with Tool Axis Oriented Normal to Plane
    4:10
  6. 5 - Curve with Tool Axis Oriented Towards a Chain
    3:02
  7. 6 - Curve with Tool Axis Oriented to Lines
    3:42
Tutorial 7
  1. Tutorial 7 covers Swarf 5-Axis.

  2. 1. Geometry Creation
    1:30
  3. 2. Swarf Toolpath With Walls Defined From The Chains
    5:05
  4. 3. Swarf Toolpath With Walls Defined From Surfaces
    1:43
Tutorial 8
  1. Tutorial 8 covers Drill & Circle Mill 5-Axis.

  2. 1. Open the File and Setup Stock
    1:07
  3. 2. MultiAxis Drill Toolpath Using Points or Lines
    3:53
  4. 3. Create the Hole Axis
    0:46
  5. 4. Circle Mill 5 Axis Toolpath
    4:05
Tutorial 9
  1. Tutorial 9 covers Flow 5-Axis.

  2. 1. Open the File and Setup Stock
    0:38
  3. 2. 5 Axis Flow Toolpath Parellel to Lines
    3:59
  4. 3. Machine Simulation
    4:27
  5. 4. Flow 5 Axis Oriented to a Point
    3:32
  6. 5. Transform Rotate the Toolpaths
    1:57
Tutorial 10
  1. Tutorial 10 covers Multisurface 5-Axis.

  2. 1. Open the File and Setup Stock
    0:49
  3. 2. Multisurface 5 Axis Roughing Toolpath
    6:05
  4. 3. Machine Simulation
    3:31
  5. 4. Multisurface 5 Axis Finishing Toolpath
    3:48

Write a review


Guest


Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...