Mastercam X9 Mill Advanced eCourse
-
-
-
-
-
This eCourse is designed to provide the resources you need to become proficient with 3D geometry creation and toolpaths. If you are new to Mastercam, it is highly recommended that you start with Mill Essentials (book or eCourse) to build a firm foundation of 2D knowledge prior to exploring 3D.
Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 15 hours to complete.
Note: The free home learning edition/demo software for this course has expired. You can still watch the videos and read the eBook but you will not be able to follow along unless you own a licensed version of Mastercam.
-
Getting Started8:49
Tutorial 1 covers Surface Rough Pocket, Surface Finish Shallow & Surface Finish Contour toolpaths.
-
1. Drawing and CAD Creation11:26
-
2. Setup Sheet, Machine Definition, & Stock Setup1:34
-
3. Rough5:38
-
4. Finish Surface Shallow6:09
-
5. Finish the Walls5:33
Tutorial 2 covers Surface Rough Pocket, Surface Finish Parallel & Surface Finish Pencil toolpaths.
-
1. Drawing and CAD Creation14:21
-
2. Setup Sheet, Machine Definition, and Stock Setup1:50
-
3. Surface Rough Pocket4:54
-
4. Surface Finish Parallel4:22
Tutorial 3 covers Stock Model, Surface HS Rest Roughing & Radial & Surface Finish Blend toolpaths.
-
1. Drawing and CAD Creation14:56
-
2. Setup Sheet, Machine Definition, and CAD Creation1:24
-
3. Change the Level and Turn off the Stock0:42
-
4. Surface High Speed Area Rough10:03
-
5. Stock Model0:53
-
6. Finish One Side of the Part6:31
-
7. Create Construction Lines1:41
-
8. Finish the Area4:45
-
9. Transform and Post3:11
Tutorial 4 covers Surface HS OptiArea, Surface HS OptiRest, Surface HS Hybrid & Surface HS Scallop toolpaths.
-
1. Drawing and CAD Creation25:09
-
2. Setup Sheet, Machine Definition, and Stock Setup1:15
-
3. Rough and Stock Model7:15
-
4. OptiRough and Stock Model16:09
-
5. Finish and Post7:57
Tutorial 5 covers Surface HS Core Roughing, Scallop, Spiral & Waterline toolpaths.
-
1. Drawing and CAD Creation27:30
-
2. Setup Sheet, Machine Definition, and Stock Setup1:40
-
3. Rough6:41
-
4. High Speed Scallop for Pocket3:59
-
5. Transform and Stock Model2:34
-
6. High Speed Spiral5:25
-
7. Finish the Walls4:36
Tutorial 6 covers Surface HS OptiCore, Horizontal, Waterline, Raster & Pencil toolpaths.
-
1. Drawing and CAD Creation9:48
-
2. Setup Sheet, Machine Definition, and Stock Setup1:46
-
3. OptiRough and Stock Model7:41
-
4. Surface HS Horizontal2:56
-
5. Surface HS Waterline3:33
-
6. HS Raster3:41
-
7. HS Pencil and Post4:27
Tutorial 7 covers Surface HS OptiArea, Rest Roughing, Surface Finish Scallop, Leftover & Project toolpaths.
-
1. Drawing and CAD Creation15:09
-
2. Setup Sheet, Machine Definition, and Stock Setup1:29
-
3. Dynamic OptiRough3:41
-
4. Surface HS Rough and Stock Model5:47
-
5. Finish Scallop3:39
-
6. Surface Finish Leftover3:30
-
7. Pocket and Surface Rough5:52
Exercises
-
2 Surface Blend1:44
-
3 Surface Blend1:06
-
CPlane - Normal0:54
-
Cplanes - Rotate1:59
-
Cube5:10
-
Curves1:14
-
Draft and Extrude1:27
-
Dynamic Plane1:10
-
Fence Surface1:31
-
Fillet Blend1:58
-
Net Surface - 10:25
-
Net Surface - 20:39
-
Net Surface - 30:58
-
Net Surface - 40:46
-
Primitives2:04
-
Ruled Surfaces0:51
-
Surface Fillet1:34
-
Surfacing - 10:55
-
Surfacing - 20:41
-
Surfacing - 30:57
-
Surfacing - 41:06
-
Surfacing - 51:19
-
Surfacing - 60:36
-
Surfacing - 70:47
-
Surfacing - 80:43
-
Surfacing - 90:53
-
Surfacing - 100:47
-
Swept - 10:31
-
Swept - 21:20
-
Swept - 30:57
-
Swept - 42:33
-
Trim Surface to Surface1:18
-
Trim to Curves1:18