Mastercam X9 Multiaxis Essentials eCourse

Buy Now

149.00 995.00

The Mastercam X9 Multiaxis Essentials eCourse is intended for the advanced Mastercam user looking to learn Mastercam Multiaxis programming. A firm grasp on both 2D and 3D machining is required and can be attained by completing the Mill Essentials and Mill Advanced Training Tutorials or eCourses.

The Multiaxis Essentials eCourse covers the different applications that are available by configuring the Rotary Axis Control page including: Rotary axis positioning and Axis substitution. It also covers the Multiaxis Classic family toolpaths: Rotary, Curve, Swarf, Flow, and Msurf. A special tutorial is dedicated to teaching how to drill and circle mill holes using Multiaxis toolpaths. Specific parameters such as Cut patterns, Tool Axis Control, Limits, Collision Control, Linking and more are described in detail.

The contents also describe how to verify the toolpaths using the new Machine Simulation module that combines toolpath backplot mode and material removal mode with collision detections.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 10 hours to complete.

Note: The free home learning edition/demo software for this course has expired. You can still watch the videos and read the eBook but you will not be able to follow along unless you own a licensed version of Mastercam.

Introduction

Getting Started

8:48

Tutorial 1

Tutorial 1 covers Contour With Axis Substitution.
1. Geometry Creation

2:49
2. Machine Definition and Stock Setup

2:21
3. Machine Cylindrical Helix

10:30
4. Conical Helix Import

1:45
5. Conical Helix Machine and Stock Setup

1:35
6. Machine the Conical Helix

7:11

Tutorial 2

Tutorial 2 covers Drilling With Axis Substitution and Rotary Axis Positioning & Transform Rotate toolapths.
1. Import the Geometry

0:56
2. Machine Definition and Stock Setup

1:56
3. Drill Toolpath

3:40
4. Drill 8 Holes

2:21
5. Engrave the Numbers

3:18
6. Contour the Top Slot

2:31
7. Rotate the Slot and Post

2:40

Tutorial 3

Tutorial 3 covers Rolldie C-Hook.
1. Import Geometry, Machine Definition, Stock Setup

2:24

Preview
2. Contour Toolpath

11:42
3. Rolldie Right Slot

4:16
4. Rolldie Left Slot

6:01

Tutorial 4

Tutorial 4 covers Contour Indexing Using Planes.
1. Import Geometry, Machine Definition, Stock Setup

2:51
2. Contour Toolpath

5:14
3. Tool Plane

0:56

Preview
4. Drill the 70 Degree Hole

2:36
5. Transform Holes

2:43
6. Machine the Top Slot

3:40
7. Machine the Top Slot

3:31

Tutorial 5

Tutorial 5 covers Rotary 4-Axis.
1. Import Geometry, Machine Definition, Stock Setup

2:28
2. Rotary Cut

9:11
3. Rotary Cut Left Side

3:09

Preview
4. Rotary Cut with Axial Cut

5:49
5. Rotary Cut with Axial Cut Left Side

4:28

Tutorial 6

Tutorial 6 covers Curve 5-Axis.
1. Import Geometry, Machine Definition, Stock Setup

3:02
2. Curve

5:05
3. Curve Out

3:14
4. Curve Multiaxis

3:08
5. Curve Mastercam

3:40
6. Curve to Lines

5:11

Tutorial 7

Tutorial 7 covers Swarf 5-Axis.
1. Import Geometry, Change Levels

2:23
2. Stock Model

2:26
3. Swarf

5:57
4. Finish Swarf

3:48

Tutorial 8

Tutorial 8 covers Drill & Circle Mill 5-Axis.
1. Import Geometry, Machine Definition, Stock Setup

2:53
2. Spot Drill

2:41
3. Drill the 5 Holes

2:16
4. 4 Hole Axis

1:02
5. Circle Mill 5 Axis

5:23

Tutorial 9

Tutorial 9 covers Flow 5-Axis.
1. Import Geometry

1:32
2. Flow Toolpath

4:22
3. Backplot and Machine Simulation

2:55

Preview
4. Flow Axis Toolpath to a Point

4:24
5. Flow on Fillet

5:10
6. Transform Toolpath and Post

2:16

Tutorial 10

Tutorial 10 covers Multisurface 5-Axis.
1. Import Geometry, Machine Definition, Stock Setup

2:01
2. MSurf Toolpath

9:22
3. Machine Simulation

2:56
4. Finish Using Multisurface

5:06
5. Machine Sim and Post

6:26

Write a review

Your name
Security Check
Rating Required

1 2 3 4 5
Comment Required
Click here

× Pasted as rich text.   Paste as plain text instead

Only 75 emoji are allowed.

× Your link has been automatically embedded.   Display as a link instead

× Your previous content has been restored.   Clear editor

× You cannot paste images directly. Upload or insert images from URL.

Insert image from URL
×

Desktop

Tablet

Phone

maranatha4888 0

June 3, 2016

1 of 1 member found this review helpful 1 / 1 member

Share this review

Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.