Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam X7 Mill Level 1 eCourse

Buy Now
149.00 995.00

This course is designed to familiarize you with the Mastercam user interface (UI) and provide the resources you need to become proficient with 2D geometry creation and toolpaths. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, (perhaps an older version) it will get you up-to-date and enhance your abilities. 

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 16 hours to complete.

Note: The free home learning edition/demo software for this course has expired. You can still watch the videos and read the eBook but you will not be able to follow along unless you own a licensed version of Mastercam.

Introduction
  1. Mastercam Workspace Video
    12:26
Tutorial 1
  1. Tutorial 1 covers Contour and Drill Toolpaths.

  2. 1. Geometry Creation
    4:54
  3. 2. Machine Setup
    3:38
  4. 3. Contour Toolpath
    12:34
  5. 4. Multi passes
    2:08
  6. 5. Contour Toolpath
    3:27
  7. 6. Drilling
    5:26
  8. 7. Post
    1:44
Tutorial 2
  1. Tutorial 2 covers Facing, Circle Mill, Contour, Spot Drill, Drill, and Chamfer Toolpaths.

  2. 1. Geometry Creation
    8:31
  3. 2. Machine Setup
    4:26
  4. 3. Face
    4:04
  5. 4. Circle Mill
    7:01
  6. 5. Contour
    5:32
  7. 6. Spot Drill and Drill
    8:25
  8. 7. Chamfer and Post
    6:01
Tutorial 3
  1. Tutorial 3 covers Slot Mill, 2D HS Dynamic Core, Contour, 2D HS Dynamic Contour, and Facing Toolpaths toolpaths.

  2. 1. Geometry Creation
    15:12
  3. 2. Machine Setup
    4:26
  4. 3. Slot Milling
    10:12
  5. 4. Rough the Outside
    6:46
  6. 5. Finish Outside Profile
    3:49
  7. 6. Clean the Inside Shape
    7:33
  8. 7. Setup 2 and WCS
    5:04
  9. 8. Face, Rename, Post
    6:36
Tutorial 4
  1. Tutorial 4 covers 2D HS Core, 2D HS Dynamic Core, Pocket, and Pocket Remachine Toolpaths

  2. 1. Geometry Creation
    17:35
  3. 2. Machine Setup
    4:23
  4. 3. 2D High Speed Core Mill
    10:49
  5. 4. 2D HS Dynamic Core Mill
    6:56
  6. 5. Pocket
    6:03
  7. 6. Remachine and Post
    6:37
Tutorial 5
  1. Tutorial 5 covers 2D HS Area Mill, 2D HS Dynamic Area Mill, and Transform Toolpaths.

  2. 1. Geometry Creation
    17:21
  3. 2. Machine Set Up
    4:22
  4. 3. Milling
    6:55
  5. 4. Milling Backplot and Verify
    2:19
  6. 5. Milling #2
    9:02
  7. 6. Machine Smaller Pocket
    5:48
  8. 7. Transform
    3:53
  9. 8. Spot Drill and Drill
    9:37
  10. 9. Circle Mill and Chamfer
    10:30
  11. 10. Renaming and WCS
    3:47
  12. 11. Dynamic Area Mill and Post
    8:47
Tutorial 6
  1. Tutorial 6 covers 2D HS Area Mill, and 2D HS Rest Toolpaths.

  2. 1. Geometry Creation
    22:31
  3. 2. Machine Setup
    3:52
  4. 3. 2D HS Area Mill
    7:59
  5. 4. 2D HS Area Mill
    6:57
  6. 5. Rest Mill
    6:30
  7. 6. Spot Drill and Drill
    10:15
  8. 7. Tap
    3:43
  9. 8. WCS
    4:07
  10. 9. Spot Drill 3 Holes
    5:35
  11. 10. Drill and Tap
    7:58
  12. 11. Drill and Counterbore
    7:51
  13. 12. Rename
    1:41
  14. 13. WCS 2
    2:25
  15. 14. Slot Mill
    5:52
  16. 15. Post
    1:28
Tutorial 7
  1. Tutorial 7 covers 2D HS Dynamic Core, 2D HS Core, 2D HS Blend, and 2D HS Peel Mill Toolpaths

  2. 1. Geometry Creation
    15:36
  3. 2. Machine Setup
    3:36
  4. 3. 2D HS Dynamic Core
    8:31
  5. 4. 2D HS Core Mill
    5:59
  6. 5. Blend
    6:06
  7. 6. Peel Toolpaths
    10:38
  8. 7. Post
    1:35
Tutorial 8
  1. Tutorial 8 covers Feature Based Drilling Toolpath (FBM).

  2. 1. Geometry
    4:11
  3. 2. Machine Setup
    3:24
  4. 3. Hole Making Operations
    2:06
  5. 4. FBM Drilling
    12:37
  6. 5. Hole Milling
    4:38
  7. 6. Custom Tool
    8:05
  8. 7. Post
    0:60
Tutorial 9
  1. Tutorial 9 covers Feature Based Milling, Feature Based Drilling Toolpaths

  2. 1. Geometry Creation
    19:13
  3. 2. Machine Setup
    3:24
  4. 3. FBM Mill
    16:24
  5. 4. Enable Machine Outside Part
    2:29
  6. 5. FBM Drill
    7:13
  7. 6. Post
    1:09
Tutorial 10
  1. Tutorial 10 covers 2D HS Dynamic Area, 2D HS Dynamic Rest Mill, and 2D HS Dynamic Contour Toolpaths

  2. 1. Geometry
    10:43
  3. 2. Machine Setup
    3:14
  4. 3. 2D HS Dynamic Area Mill
    11:46
  5. 4. Rest Mill
    8:18
  6. 5. Rename
    2:15
  7. 6. 2D HS Dynamic Core Mill
    6:59
  8. 7. Dynamic Contour
    8:34
  9. 8. Rename and Post
    2:22

Write a review


Guest


Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...