Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam 2017 Multiaxis Essentials eCourse

Buy Now
149.00 995.00

The Mastercam 2017 Multiaxis Essentials eCourse is intended for the advanced Mastercam user looking to learn Mastercam Multiaxis programming. A firm grasp on both 2D and 3D machining is required and can be attained by completing the Mill Essentials and Mill Advanced Training Tutorials or eCourses.


The Multiaxis Essentials eCourse covers the different applications that are available by configuring the Rotary Axis Control page including: Rotary axis positioning and Axis substitution. It also covers the Multiaxis Classic family toolpaths: Rotary, Curve, Swarf, Flow, and Msurf. A special tutorial is dedicated to teaching how to drill and circle mill holes using Multiaxis toolpaths. Specific parameters such as Cut patterns, Tool Axis Control, Limits, Collision Control, Linking and more are described in detail.

The contents also describe how to verify the toolpaths using the new Machine Simulation module that combines toolpath backplot mode and material removal mode with collision detections.

 

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 10 hours to complete.

Introduction
  1. Workspace 2017
    5:22
Tutorial 1
  1. Tutorial 1 covers Contour With Axis Substitution.

  2. 1. Geometry Creation
    3:18
  3. 2. Machine Definition, Stock Setup
    1:54
  4. 3. Machine the Cylindrical Helix
    5:52
  5. 4. Create and Machine the Conical Helix
    4:24
Tutorial 2
  1. Tutorial 2 covers Drilling With Axis Substitution and Rotary Axis Positioning & Transform Rotate toolapths.

  2. 1. Import the Geometry and Setup the Stock
    2:04
  3. 2. Axis Substitution About Y Axis
    3:38
  4. 3. Rotary Axis Positioning About X Axis
    3:06
  5. 4. Axis Substitution Y Axis Contour
    4:03
  6. 5. Create a Slot Toolpath
    3:16
  7. 6. Translate Toolpath
    2:40
Tutorial 3
  1. Tutorial 3 covers Rolldie C-Hook.

  2. 1. Import the Geometry and Setup the Machine
    2:41
  3. 2. Axis Substitution About Y Axis
    6:35
  4. 3. Rolldie
    7:60
Tutorial 4
  1. Tutorial 4 covers Contour Indexing Using Planes.

  2. 1. Import the Geometry, Machine Definition
    2:18
  3. 2. Contour on Y Axis
    4:41
  4. 3. New Toolplane and Drill
    4:34
  5. 4. Rotate and Drill Holes
    2:07
  6. 5. Top Slot
    3:27
  7. 6. Machine Bigger Slot on New Toolplane
    3:38
Tutorial 5
  1. Tutorial 5 covers Rotary 4-Axis.

  2. 1. Import the Geometry, Machine Definition
    2:27
  3. 2. Rotary 4 Axis with Rotary Cut
    4:18
  4. 3. Rotary 4 Axis with Rotary Cut Left Surface
    1:32
  5. 4. Rotary 4 Axis with Axial Cut
    4:16
  6. 5. Rotary 4 Axis with Axial Cut Left
    4:27
Tutorial 6
  1. Tutorial 6 covers Curve 5-Axis.

  2. 1. Import the Geometry, Machine Definition
    2:12
  3. 2. Curve with Tool Axis Control
    4:52
  4. 3. Curve with Tool Axis Control Oriented From A Point
    4:08
  5. 4. Curve with Tool Axis Control
    3:41
  6. 5. Curve with Tool Axis Control Towards a Chain
    3:56
  7. 6. Curve with Tool Axis Control About the Line
    5:24
Tutorial 7
  1. Tutorial 7 covers Swarf 5-Axis.

  2. 1. Import the Geometry and Select the Machine Definition
    1:55
  3. 2. Stock Model
    1:17
  4. 3. Swarf Toolpath on Walls
    6:09
  5. 4. Swarf Walls from Surfaces
    3:34
Tutorial 8
  1. Tutorial 8 covers Drill & Circle Mill 5-Axis.

  2. 1. Import the Geometry and Setup the Machine
    2:17
  3. 2. Spot Drill and Drill the Holes
    5:28
  4. 3. Create Hole Axis
    1:01
  5. 4. Drill the .5 Holes
    5:59
Tutorial 9
  1. Tutorial 9 covers Flow 5-Axis.

  2. 1. Import the Geometry, Setup Tool Settings
    1:10
  3. 2. 5-Axis Toolpath Parallel to Lines
    4:50
  4. 3. Machine Simulation
    1:57
  5. 4. Flow 5 Axis Toolpaths
    3:42
  6. 5. Rotate
    2:14
Tutorial 10
  1. Tutorial 10 covers Multisurface 5-Axis.

  2. 1. Import the Geometry, Setup the Machine
    1:39
  3. 2. Multi Surface
    4:46
  4. 3. Machine Simulation
    1:51
  5. 4. Multi Surface and Post
    3:53

Write a review


Guest


Gatiel

  • 4
   1 of 1 member found this review helpful 1 / 1 member

excelent

Share this review


Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...