317 replies to this topic

[JParis]

GMCCS Download page

Also still available for X4

Thanks go to the guys at GMCCS

[Müřlıń®]

JParis, on 11 November 2010 - 08:28 AM, said:

GMCCS Download page

Thanks go to the guys at GMCCS

Thanks for posting that link buddy

[Reko]

JParis, on 11 November 2010 - 08:28 AM, said:

GMCCS Download page

Thanks go to the guys at GMCCS

+1

And thanks for posting the link Mr. Paris.

[Dave.L]

John,

Just a suggestion....Maybe rename the thread title to:

"X+ Setup Sheet and Tool List - 3rd party Add-on"

This way users that are not familiar with it will have a better idea what it is. And, the tool is available for other version not only X5

[malibu]

thank you GMCCS !!!!!!

question: how can I get x+5 to remember setting when closed?
(windows 7)

[peon]

question: how can I get x+5 to remember setting when closed?
(windows 7)
[/quote]


I have the same problem here Malibu.  I can't get the settings to stick.

[Supercar 2006]

thanks j

[Supercar 2006]

X+ Setup Sheet can't rename this time ?????? ,anyone know how to changer

[Supercar 2006]

ok guy, try this it working for me, go x+ folder x4 copy all file and past to x5 x+ it will save all setting befor.

[Glenn Bouman]

I like the new Selection with Chaining dialog it allows you to use the Chain Feature as a selection method.

[Günther Massimo - GMCCS]

Quote

question: how can I get x+5 to remember setting when closed?

I'll look into this.
Looks like it is a Win7 issue, because the settings stick on my "old" Vista.


@Supercar 2006
Not all files. Don't copy the DLLs.

[malibu]

Günther Massimo - GMCCS, on 12 November 2010 - 06:06 AM, said:

I'll look into this.
Looks like it is a Win7 issue, because the settings stick on my "old" Vista.


@Supercar 2006
Not all files. Don't copy the DLLs.

thank you Gunther ! I can not picture Mastercam with out this great tool.

[CADCAM3D5AXIS]

Hi Gunther
Is there a x+ for lathe in the future ?  the mill software works GREAT  Thanks For All your Work.

[left coast lefty]

Quote

I like the new Selection with Chaining dialog it allows you to use the Chain Feature as a selection method.

+100000

[Thoob]

If I may ask a dumb question here. How do you use this add on? I d/loaded it for my X4 but the install was in German. Not sure where to start.

[Dave.L]

Thoob, on 21 November 2010 - 10:07 AM, said:

If I may ask a dumb question here. How do you use this add on? I d/loaded it for my X4 but the install was in German. Not sure where to start.

Add the X+ Toolbar, then you will have icons for the Tool list and setup sheet. As far as the lang., there is a lang.dll if I remember correct.

Search the forum and you will find lots of info on this.

[Jay Kramer @ Precision Programming]

If you downloaded the English version it installs in German but when you run it it will be in English..

[peon]

I may have found a solution to saving the settings for Windows 7 users.  Go to -Control Panel- and type in "Action Center" in the search window in the upper right hand corner, select "ACTION CENTER" in the main window, click on "Change User Account Control settings" on the far left, drag the slider to the bottom.  I was suddenly able to save my setup sheet settings and I have a hunch that the procedure mentioned above did the trick.  Give it a shot and let us all know.  

[Code_Breaker]

it appears that this is only for Mastercam ... we used multiple systems and would like CATIA, NX, etc. to spit out the same format for all docs. Do they have another site the these products?  Is there a third-party that does?

[JParis]

Don,

I think you would be looking at a completely custom app to do that, they all handle that info in different manners.