9 replies to this topic

[bigprody]

Just started running X6 Mill and everytime I start a new file I get an "error loading holder from file". I figure that it is just a directory mapping problem but for the life of me I cannot find where to set the default for the tool holders. Any help would be greatly appreciated.

Kevin

[peon]

In the MCAMX CONTROL APPLET, Go to "User Interface" and in the box to the right, make sure the "File Dialog Style" is set to "Mastercam X style"  If it is set to "Microsoft Windows standard", you may get that error.  It is a known and logged bug with CNC.

[bigprody]

Thanks for the quick reply. Unsure of what you mean by "MCAMX CONTROL APPLET".

Kevin

[gcode]

it's in the Windows Control Panel

If you have multiple versions on Mastercam installed, be sure to select X6 from the drop down.

If you're run X6 x64 and earlier version of Mastercam, there will be 2 apllets in the control panel
an x32 version and an x64 version

[Rickster™]

Quote

If it is set to "Microsoft Windows standard"

Heads up

If you don't leave it set to  "Microsoft Windows standard"  You will loose
the 'ask to overwrite' when reposting a cutter path.

[bigprody]

Running Windows 7, still having problems finding the Applet.

Kevin

[Rickster™]

Start button/all programs/mastercam X6/McamX  control panel Applet

[austing]

I thought this was when you tried to start a new tool path and it was looking for the holder that was associated with your default operation on that toolpath.

[kunfuzed]

I tried changeing the applet like above and no luck... any other ideas?

[kunfuzed]

I tried changeing the applet like above and no luck... any other ideas?