There should be a stock model "toolpath" in Router as there is one in Mill but it is not in any of the toolpath menus. It can still use rest machining toolpaths and calculate the stock model but there is no actual stock model toolpath with what i can see the visual comparison. Am i missing something?
0
Router and stock compare
Started by
Plogard
, Jul 03 2012 06:47 AM
5 replies to this topic
#2
Crazy^Mill/Turn
-
- Members
-
- 10,545 posts
Regular Guy
- Location:Murrieta Ca
Posted 06 July 2012 - 11:24 PM
Nope it has not made it over there yet. Use Mill it does the same thing as Router IMHO.
#3
Plogard
-
- Members
-
- 3 posts
Newbie
Posted 09 July 2012 - 02:02 AM
Which is weird, because from mastercam.com you would read out that router does have it.
#4
Crazy^Mill/Turn
-
- Members
-
- 10,545 posts
Regular Guy
- Location:Murrieta Ca
Posted 16 July 2012 - 10:35 AM
It is now fully added in MU2. Download and see if works like you would want.
#5
Jay Kramer @ Precision Programming
-
- Moderators
-
- 3,022 posts
Advanced Member
- Location:Santa Clarita, Ca
Posted 02 August 2012 - 10:10 AM
Router does have it before MU2 use the picture to be able to use it.
Attached Files
-
stockmoderouter.jpg 124.66K
19 downloads
#6
Plogard
-
- Members
-
- 3 posts
Newbie
Posted 10 August 2012 - 03:26 AM
Nice, i do have MU2 but this is definetely good to those who don't!
