1 reply to this topic

[danielm]

(*---------------------------*)
(T42 = .625 X .4 X .122RAD INSERT 2FLT CUTTER)
(T26 = .5 BALL INSERT_RA216F-13O13S-026 P20A)
(T25= .500 X 1.0 X 1.2OOH 4FLT TAILN CEM)
(T24= 1.0 X 4.12 X 4.3OOH 5FLT NIAGARA TIALN FINISH EM)
G0 G17 G20 G40 G80 G90
G0 Z30
(ROUGH CLEVIS SUPPORT TO .125 THK B0)
M08
IF[VATOL EQ 42] N1
T42 M06
N1 (.625 X .4 X .122RAD INSERT 2FLT CUTTER)    <===  Need this line to be N42 (.625 X .4 X .122RAD INSERT 2FLT CUTTER)
(TOOLPATH - M.ROUGH..........)
(STOCK LEFT ON WALLS = 0.)
(STOCK LEFT ON FLOORS = 0.)
G15 H68
G0 G90 X9.7746 Y1.341 B0. S3972 M3
G56 H42 Z1.3221
T26



Thanks!!!

[K2csq7]

Use the debugger to find where the offending line is being output from, just above it in the post put...
n$ = t$