2 replies to this topic

[PcRobotic]

Hi,
I would like to know if I can list my .NC file list in the post so I won't make the setup-man knows where the file is for example


%
O0001 (HORIZONTAL OP1 OF 3.NC)
(Source = M:\STEVEN LUONG\TEST\HORIZONTAL.MCX-5)
(NC = N:\NC\ Op1 Of 3.NC) <=================================
(Raw Material = ALUMINUM  6061 T6)
(****** Setup Instructions ******)
(PROGRAMMER ABC WANTS SETUP-MAN MUST PERFORM:)
(1. SQUARE PARTS FROM VERTICAL PRIOR MACHINE IN HORIZONTAL)
(2. BRING SQUARED PARTS TO QC AND WAIT FOR APPROVAL)
()
(THIS PROGRAM IS MEANT FOR ABC.)
(Approved By: , Machine Name: A55 Makino)
(AUG.20.2012**At-9:24 AM)
(T1 =4"  FACE MILL    )
(T2 = 3/4 FLAT ENDMILL   )
(T3 = 3/4 DRILL   )
(T4 = 3/8 FLAT ENDMILL   )
(T5 = 1/4 SPOTDRILL   )
(T6 = NO. 7 DRILL     )
(T7 = 1/4-20 TAPRH    )
(T8 = 7/8 DRILL   )
(T9 = 7/16 DRILL )
(T12 = 3/8 DRILL   )
(T10 = 1/4 FLAT ENDMILL   )
(T11 = 1/8 FLAT ENDMILL   )
(********** Work Offset List **********)
G90
G10 L2 P0 X0 Y0 Z0 B0 (G53 Zero)
G10 L2 P1 X-10. Y0. Z-22.965 B0.
G10 L2 P2 X-5. Y0. Z-27.965 B0.
G10 L2 P3 X0. Y0. Z-17.965 B0.

[Lee1]

spathnc$ + snamenc$ + sextnc$

[PcRobotic]

Thank you Lee1