Awesome dude!

Haha!! success! thank you so much.

Yes, tried it multiple times

Its the exact same with stock model..... this is driving me crazy

Here ya go... i couldent upload the stl it said im not permitted to upload this type of file. You should be able to save some and then select save as stl. Thank you H9186-083.MCX-7

Aaron, I got ahold of my reseller and he also was stumped . My stock shows up under initial stock but when i toggle stock on and off it shows as a block. I have my stl set as stock in both machine group stock setup and verify option in the operations manager. We cut alot of extrusion here so a solid block is no beuno for verify. (I know the stl file is correct because it works just fine in x6) I attached a pic of whats going on the yellow is what i need the stock to show up as but the pink is what its coming out as.

I have already tried checking stock. When i check stock it shows up as a box rather than my the stl i generated. I also created a stock model and tried using it as well, same problem....

hOW CAN I USE AN STL AS MY STOCK INSTEAD OF A BOX IN X7? I HAVE MY STOCK SET TO FILE AND THE RIGHT STL IN BOTH STOCK SETUP AND VERIFY OPTIONS! I CAN SEE THE STOCK UNDER INITIAL STOCK BUT THE CUTTER JUST PASSES RIGHT THROUGH. IF THIS IS AN UPGRADE IM CANCELING MY MAINTENANCE THE SOFTWARE JUST SEEMS TO BE GETTING WORSE ):