C-axis post

[rchipper]

The tool header you desire is achievable, but you will need to modify the information put into a buffer. And create variables to hold the information that you have collected when retrieved. Then you need to write the code to format the information that you now have.

It would take longer to try to explain it, than it would take to do it. Probably about 4 hours to code and debug.

 

The above quoted code looks like a C-Axis 'wind up' error in the post. While engaged in a cut, X-Axis is moving .077 and C-Axis is 365 degrees. A little more complicated to deal with, since sometimes that is what is intended.

 

You have your work cut out for you. I would suggest maybe having a professional fix the post for you, or buy one from your reseller. Hope that helps you understand what is involved, and Good Luck!

 

 

Yes, I figured it would be complex.

 

I thank you for your support.

rchipper

[bigjohn]

Have you tried the mplmaster post. I moded a V5 mplmaster for a Naka and it came OK.

[Guest]

Post processor work really isn't for everyone.

[PcRobotic]

Something here seems to apply to this forum...

hahahahahaha