Angle step & Feed in wrong place

[AlbertZini]

1.Why when I write angle step 45, he does not change in program

 

2.And the output feed in the wrong place

 

 

%

O3171

(PROGRAM - O3171.NC)

(DATE - MAY-15-2013)

(TIME - 7:23 PM)

(T4 - ENDMILL D8. - H4 - D4 - D8.000mm)

G01 G17 G21 G40 G80 G90 ( -------------------- need here G00)

G91 G28 Z0.

(COMPENSATION TYPE - COMPUTER)

T4 M06 (ENDMILL D8.)

G01 G17 G90 G54 G94 A-40.45 X-93.325 Y-23. S5500 M03 F600. ---- (G01 & F600. in wrong place, need here G00)

G43 H4 Z44.396

M08

Z36.001 ----------------------------------------------- (G01 & F600.need here )

Y-11.5 Z35.946 A-40.803

Y-5.75 Z35.977 A-40.979

Y-2.875 Z35.991 A-41.067

Y-.719 A-41.133

Y0. Z36. A-41.156

A-42.994 F954.9

A-44.833

A-46.67

A-48.507

A-50.343

A-52.179

A-54.013

A-55.848

A-57.681

A-59.515

A-61.347

A-63.179

A-65.011

A-66.841

A-68.672

A-70.501

A-72.331

A-74.159

A-75.988

A-77.815

A-79.643

A-81.469

A-83.406

A-84.966

A-86.792

A-88.616

A-90.441

A-92.265

..............

..............

[Chris McIntosh]

It appears as though you have your "convert rapid to maximum feedrate" option selected in the control definition. Open your control definition under the settings menu, select the feed menu and uncheck the appropriate box.

[AlbertZini]

It appears as though you have your "convert rapid to maximum feedrate" option selected in the control definition. Open your control definition under the settings menu, select the feed menu and uncheck the appropriate box.

No, this option is not enabled.

I turned off the first entry in linking and everything became good, but the question remained with angles