Manually Controlling X Style Coolant in Post for Special Functions

[huskermcdoogle]

Guys,

 

I was fed up with legacy coolant and needed more outputs, easiest way for me to make it work like I wanted was to switch to x style coolant commands.

 

All is good, except one problem.

 

When I index my right angle head / change work planes in a null tool change situation, I need to save the coolant states, turn them off, index, and then apply the coolant that goes with the next op, or if there is no difference, just turn it back on the approach.

 

Does anyone know how to do this with x style coolant.

 

Thanks,

 

Husker