post question about dwelling

[rgollar]

When I drill and say dwell for a c'sink for example it does the code right. But at the P2000. it adds a decimal after the P2000, which errors my controller because it wants it without a decimal point. Is there a way to make master cam post the P value with out a decimal point? Thanks in advance.

[FROZEN]

ask in the post forum, it needs to be changed in the post

 

# Format statements - n=nonmodal, l=leading, t=trailing, i=inc, d=delta

# --------------------------------------------------------------------------

#Default english/metric position format statements

fs2 1 0.7 0.6 #Decimal, absolute, 7 place, default for initialize (

fs2 2 0.4 0.3 #Decimal, absolute, 4/3 place

fs2 3 0.4 0.3d #Decimal, delta, 4/3 place

#Common format statements

fs2 4 1 0 1 0 #Integer, not leading

fs2 5 2 0 2 0l #Integer, force two leading

fs2 6 3 0 3 0l #Integer, force three leading

fs2 7 4 0 4 0l #Integer, force four leading

fs2 8 5 0 5 0l #Integer, force five leading

fs2 9 0.1 0.1 #Decimal, absolute, 1 place

fs2 10 0.2 0.2 #Decimal, absolute, 2 place

fs2 11 0.3 0.3 #Decimal, absolute, 3 place

fs2 12 0.4 0.4 #Decimal, absolute, 4 place

fs2 13 0.5 0.5 #Decimal, absolute, 5 place

fs2 14 0.3 0.3d #Decimal, delta, 3 place

fs2 15 0.2 0.1 #Decimal, absolute, 2/1 place (feedrate)

fs2 16 1 0 1 0n #Integer, forced output

fs 17 1.4lt #Decimal, absolute, four trailing

fs2 18 3 0 3 0 #Integer, no leading, no trailing created for op_cnt variable ptk

[Tim Johnson]

Look for dwell$ format line, change number value to 4.

 

 

 

fmt P 4 dwell$ #Dwell <<<<<<<<<<<<<<<<<

[PcRobotic]

I have this problem before, and Tim Johnson is right.