redundant coordinates

[blue hootie]

Using X6 lathe with a modified generic post proccesor.

I am getting redundant coordinates on my posted programs.

For example, on a peck drilling cycle, machine rapids to X0.0

like it should but then every line with a

Z feed also outputs a not needed X0.

 

 

N1 ( NO.18 DRILL )

G00 X1.5Z4.0

G97 S1577 M13

T9090

X0.Z.5

Z0.

G98 G01 X0. Z-.02 F4.04

G00 Z0.

Z-.017

G01 X0. Z-.05

G00 Z0.

Z-.047

G01 X0. Z-.08

G00 Z0.

Z-.077

G01 X0. Z-.11

G00 Z0.

Z-.107

G01 X0. Z-.14

G00 Z0.

Z-.137

G00 Z.4

 

This can chew up a lot of memory on my control and can be an issue on longer programs.

Same thing happens with turning tool paths. Any ideas?

Quote

MultiQuote

Edit

[JayM]

Open your post and look for plinout. Paste the code from this post block. Default should look like this:

 

plinout		 #Output to NC, linear movement - feed
  pcan1, pbld, n$, psgplane, sgfeed, pexct, psgcode, psccomp, pwcs, pxout,
    pyout, pzout, pcout, pfr, pscool, strcantext, e$
  if rpd_typ$ = 7, ptool_insp	  #Tool inspection point

 

pxout may be pfxout this forces the X coordinate to be output on everyline.