Flag to indicate Transform Toolpath?

[Mick]

Is there some kind of flag to indicate that the toolpath is the result of a transform toolpath (something like tool_op)?

 

The reason being, I have a MR setting that only works on the first toolpath(s). Any subsequent toolpaths that are the "result" of the transform toolpath don't output the expected code that the MR triggers.

[crazy^millman]

Mick you may have to store it, but a transform toolpath goes through the null tool change section and not the tool change section. Where have you activated the MR trigger? I have not looked it up, but I am sure there are triggers for that. Got an example or something to look at?

 

Look here as well.

 

http://www.emastercam.com/board/index.php?showtopic=76478

[Mick]

Thanks Ron. Yes, I tried that, and got some kind of results, but they weren't perfect.

 

As it goes through the Null toolchange, that is probably the issue, as the null toolchange section in this post causes a bunch of problems, that can't be fixed because they're in the binary.

 

Thankfully, the issue I have is relatively remote (at least for me)