Using a X6 post in X5 version question

[Cbgstyleshindsbock]

Wanting to know if its even possible to use a X6

Post in a X5 version Of MC ?

[crazy^millman]

Yes, use the alt-c to bring up run Chook and run the update post chook. Pick the post and then life should be good. Will also want to update the machine and control definition.

 

HTH

[Cbgstyleshindsbock]

Thank you so much I love this site

HTH thank you so much

Chris

[crazy^millman]

Chris HTH is (Hope that Helps)

 

Ron is the name.

[Cbgstyleshindsbock]

Lol

Thanks rom

[Allan]

X6 post in X5...update post chook?

 

Updatepost does not need to be done since the post is in a future version to X5.

I would wonder why you would want to do this?

[crazy^millman]

Allan I thought he worded the topic wrong read the posting and see where he made his mistake in the topic, but thought he corrected that when he made his posting. I had to read it again and what I posted what I posted, but think you might be right yes there is no way to go backwards with posts.

Edited February 27, 2014 by Crazy^Millman

[Cbgstyleshindsbock]

Sorry guys my mistake