Can Seats be rented of MasterCam

[BGshocker]

I need to use a seat of masterCam since I don't own one to do a side project.

 

A: is this legal and if so where are there places that rent seats out so I can get the code to hand input?

 

I know how to program via mastercam and need to make a small easy project to work for a HAAS vf2

that is just going to drill holes then come back and tap those holes in a flant piece of steel.

What I am worried about is is not getting all the normal modal commands at the beginning of the

code and so on. This person I need to do the piece work for...well the floppy drive is broke on his HAAS

so I will need to hand input all the code.

 

Any suggestion would be much appreciated.

 

ps If i posted this in the wrong area don't get mad I am a noob here.

 

Brian G

Portland, Oregon area

[htm01]

doesn't the HAAS have quick code right on the machine?

[htm01]

%

O0

(PROGRAM NAME - T )

(DATE=DD-MM-YY - 24-04-14 TIME=HH:MM - 07:15 )

G20

G0 G17 G40 G49 Z0. G80 G90

( CENTERDRILL TOOL - 3 DIA. OFF. - 3 LEN. - 3 DIA. - .25 )

T3 M6

G0 G90 G54 X0. Y0. S1500 M3

G43 H3 Z.1

M8

G98 G81 Z-.25 R.1 F5.

G80

M5

G90 G49 Z0. M9

G53 Y0.

M01

( # 7 DRILL TOOL - 2 DIA. OFF. - 2 LEN. - 2 DIA. - .201 )

T2 M6

G0 G90 G54 X0. Y0. S1500 M3

G43 H2 Z.1

M8

G98 G83 Z-.75 R.1 Q.1 F4.

G80

M5

G90 G49 Z0. M9

G53 Y0.

M01

( 1/4-20 TAP TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - .25 )

T1 M6

G0 G90 G54 X0. Y0. S180 M3

G43 H1 Z.4

M8

G98 G84 Z-.5 R.4 F9.

G80

M5

G90 G49 Z0. M9

G53 Y0.

M30

%

[Craig-B]

Mastercam Is not in the cloud right now may be in the future, Get with your Mastercam re-seller.

Edited April 24, 2014 by FNMI
Linking to competitor product

[BGshocker]

• thanks for the feed back. I put this to good use. This is an old VF2 from 1998
  

[Thad]

ps If i posted this in the wrong area don't get mad I am a noob here.

 

Yeah, I'd say that the Post Processor Development Forum is a great place to start!

[guitar]

doesn't the HAAS have quick code right on the machine?

 

 

That was my 1st question, too.

[mkd]

doesn't the HAAS have quick code right on the machine?

depends if:

a. it came with it

b. some yahoo didn't delete the files outta the 9000 programs area

c. drilling and tapping shouldn't need CAM.