X8 not giving a warning with collision check activated on holder

[loginname]

[billb]

Hi,

 

The message is still in X8. But you seemed to have uncovered an issue.

I have an X6 part with an HST operation with no holder checking, no holder.

I open the part in X8 and turn on holder checking (default holder) and clearance on bottom and regen and I do not get the warning. More troubling - it seems to have not checked the holder.

 

As a work-around, I selected a different holder, saved the parameters, then went back and reselected the original (default) holder. Now when I regen, I get the message and the motion is clipped to avoid holder collision.

 

I will submit this as a defect. If you wish, post your part or email to me (or QC Inbox).

 

Thanks,

Bill B