Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Climb & convetional change automatically


Stan Marsh
 Share

Recommended Posts

Hi Everyone

 

Please look at below video.

 

http://videobam.com/eIEYm

 

i get a machining for this part by finish surface hybrid.

I don't know very the mastercam change the machining direction during the machining.

from 0 to 39 second of video it is conventional

from 39 to 1.06 second it is climb

and from 1.06 to end it is convetiobnal. :help:

 

Pleaselet me to know why?

 

Thank you

Link to comment
Share on other sites

Is it a surfacing toolpath and you are using zig zag as the pattern. If so that will tell Mastercam to do exactly what you are saying which is exactly what you just described which is exactly what you told it to do.

 

If you want always one direction in surfacing toolpaths then you must pick that to get that.

 

HTH

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...