Post change help

[Shawn Wentzel- Wenteq Inc]

I recently purchased a post and was told it would take a week to modify this.

 

At the end of a tool cycle, before a tool change, It is outputting a default of Z10. and I need it to say Z50.

 

It is for an okuma mb4000 horizontal.

 

I cant find in the post where this is located.  I thought it was typed out literally like Z10., but I did a ctrl+F and couldn't find it in the post.

[Guest]

Look in the peof section or pretract

[The Cathedral]

If it's not defined in your post, it's probably grabbing it from your machine definition. Open up your machine definition manager > axis combinations > home position.

 

When I made my post for our Okuma I put the "G0 Z50." line in the post at pretract and plastretract so that there is absolutely, positively no way for that not to be output. 

[Colin Gilchrist]

Shawn,

 

If you can post up a Zip to Go file with your MD/CD/PST (make sure the file has at least 1 toolpath, and that you include the "toolpaths" checkbox when creating the file), I'll take a look...

 

Thanks,

 

Colin

[Shawn Wentzel- Wenteq Inc]

I found it in the post.

 

There was a line called zhome under general output settings