modding my current Haas post for Dynapath?

[honeybunches]

I am at odds with this one.  I have a proven out dynapath post we used years ago.  However, I have our Haas post that I spent a LOT of time with tuning some simple things like turning on spindle, dwells, running table from G54-G57, then G57-G54, etc.  Just little things. 

 

I have never really modified a dynapath post so I am wondering which way I should go on this?  I am just going to assume what I am looking for is not really floating around out there.  I guess it might be that I totally forgot how I got the subroutines in there.  I think I might have actually got a post with all this in it.  I am sold on subs and use this as standard programming for multiple offsets now. I set a variable in when programming, and the post will output which ever offsets I desire repeated so when I repeat 3x, it will post out G54, G55, G56, G57. 

 

Problem is I think subs are called a bit different with the dynapath. 

[Dave Allen]

Why not post a subroutine with your old dyna post and again with the new haas post and see what the drifference is if any. Then you'll have an idea of what you need to do.