Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

G88 reversal of tapping for Dual Head


Recommended Posts

The M3 or M4 are for the Lathe Spindle if it is a milling Spindle you will need to call the correct M-Code for the CW or CCW direction for the milling spindle on that machine.

 

I have seen it down many different ways over the years. M53 and M54, M88 and M87, M103 and M104. You need to get out your manual and see what it says for that correct Mcode.

 

HTH

Link to comment
Share on other sites

The machine is a Doosan Puma 2100SY. The spindle, sub-spindle, and live head all use M3 and M4, However, in addition; P11, P12 and P13 is used to apply the distinction. For whatever reason, the program will not recognize a spindle reversal. The temp solution is to use a single live head but hopefully we'll find the trick to getting the reversal we're looking for.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...