macro programming with navimill

[Candyman]

Hi all,

im trying to get navimill operational on our hartford (mitsubushi control) mill..

im obviously missing something because i can created a main program

but within the program its calling up macro program numbers that i cant find..

ive got my tool file(9111),cut condition file (9112) and param file(9113)..

in regards to say a macro pocket, face or drill it outputs certain program numbers depending on what operation 

is programmed and its these program numbers that arnt showing up in my controls memory when programmed..

im sure its something simple but im stumped...

Any help would be great!

 

[cncchipmaker]

If you do not see the subs in your directory they probably are not there and need to be uploaded. Usually 9000 series programs can only be manipulated by turning on a parameter, this is the case for Fanuc.

[Candyman]

any idea wha param number?

might be similar to mitsubishi..

thanks

[Allan]

Are you sure its calling up macro program numbers or is it variables?

 

M98 P9321

 

Or is it X#432Y#444

 

 

There is a pdf here that may be of help.  https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CB4QFjAAahUKEwipkPXPlojHAhWQfpIKHSLoChE&url=http%3A%2F%2Fwww.mitsubishielectric.fr%2Fservlet%2Fcom.univ.collaboratif.utils.LectureFichiergw%3FID_FICHIER%3D1309451736544&ei=sOK8Van4DJD9yQSi0KuIAQ&usg=AFQjCNELgmk0MdLWtB9GpDKkVdhJsZmnMA&bvm=bv.99261572,d.aWw&cad=rja

 

 

Just read the section in the manual chapter 5.4 will tell you the program numbers that you are missing.

 

 

Allan