Mori Dura Vertical 3+2 Tilt Help post processing

[Hieu Nguyen_45077]

Hello,

I could not understand about 5-axis post processing.

I tried to program for 3+2 axis and I got different between un-check and check box at Force Tool Change.

When I don't check at Force Tool Change I get A and B different with check at that box.

 

When I checked I got program like:

T7M6(1/4 [0.25] X 1.25 OOH/REACH, 0.5 MIN. FL, CARB. BALL EM, USE ER-16 HOLDER  )

(OPERATION 11 ROUGH AND LEAVE 0.06)

G0G54G90X-5.4378Y-1.25A-90.B75.S9000M3

M10

M68

G43H7Z4.4

M8

Z2.65

G1Z2.15F75.

.....

M5

G0G28G91Z0.

M11

M69

M01

G0G17G40G80G90G94G98

G0G28G91Z0.

T7M6(1/4 [0.25] X 1.25 OOH/REACH, 0.5 MIN. FL, CARB. BALL EM, USE ER-16 HOLDER  )

(OPERATION 13 ROUGH AND LEAVE 0.01)

G0G54G90X-5.2493Y1.175A90.B70.S9000M3

M10

M68

G43H7Z8.5

M8

Z2.8

G1Z2.3F75.

Y1.1743F70.

.....

 

In this case is not convenient because when it needs to rotate to different angle.

 

 

 

When I un-checked Force Tool Change I got program like:

 

T7M6(1/4 [0.25] X 1.25 OOH/REACH, 0.5 MIN. FL, CARB. BALL EM, USE ER-16 HOLDER  )

(OPERATION 11 ROUGH AND LEAVE 0.06)

G0G54G90X-5.4378Y-1.25A-90.B75.S9000M3

M10

M68

G43H7Z4.4

M8

Z2.65

G1Z2.15F75.

.....

Z3.6

(OPERATION 13 ROUGH AND LEAVE 0.01) (Next operation with different angle)

Z8.5B-75.

X-5.2493Y1.175

M11

M69

A-270.B-70.

M10

M68

M11

B70.

M10

Z2.8

G1Z2.3F75.

Y1.1743F70.

....

In this case I got rotary turn back to origin of the machine then turn back to the angle that I wanted.

 

So is there any chance to get into the post and make it change to get right angle that I wanted without tool change between 2 operations are using same tool?

 

Thank you for you help.