Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

3axis VS 4axis post processor


Recommended Posts

Hello everyone,

   I've been doing post for a while since I had some old machine can only take 125KB per program and the longer I'm posting with the 4axis post for 3 axis machine I found out that 3axis post has SHORTER codes.

 

   Honestly, I do need the 4AXIS post because two functions in one post.  My question is, "is there away we can make the 4axis post spits out codes as short as 3axis post?"

 

 

I think the 3axis post processor spits out more arc movements than the 4axis.  I tried to go into the machine difinition and playing around with the ARC settings and I still have no luck with it.  

 

Thanks for you guys helping me out.

 

Below here is the sample of the same operation with different post processor:

 

3axis post codes: (has more ARCs)

%
O0258(Cross Base- Op1.NC)

(C:\USERS\PCROBOTIC\GOOGLE DRIVE\JOBS\STRIKER\CROSS BASE.MCX-9)(Material Type 7075 - T6)(Posted On AUG. 21 2015 At 21:10)(*)(T9 |.1875 , 3/16 EM | H9)(*)N9(2D HIGH SPEED TOOLPATH - AREA MILL)G0 G17 G40 G49 G80 G90G91 G28 Z0.M8T9 M6(.1875 , 3/16 EM)G0 G90 X-1.4085 Y-.7479 S7500 M3G43 H9 Z1.Z.0625G1 Z-.0003 F50.X-1.4191 Y-.7585 Z-.0004G3 X-1.4112 Y-.7688 I.0106 J0.G1 X-1.4098 Y-.7691 Z-.0005X-1.4085G2 X-1.3081 Y-.7668 Z-.004 I.0671 J-.7387X-1.2194 Y-.7762 Z-.0071 I-.0333 J-.741G1 X-1.2059 Y-.7807 Z-.0075G2 X-1.1358 Y-.8219 Z-.0103 I-.0787 J-.2141X-1.1206 Y-.8387 Z-.0111 I-.1738 J-.1732X-1.0762 Y-.9194 Z-.0143 I-.189 J-.1564G1 X-1.0744 Y-.9309 Z-.0147G2 X-1.0691 Y-1.1085 Z-.0182 I-.7334 J-.1105G3 X-1.0479 I.0106 J0.G2 X-1.0508 Y-1.0313 I.7387 J.0671X-1.0423 Y-.9285 Z-.0218 I.7416 J-.0101G1 X-1.0408 Y-.9194 Z-.0221G2 X-.9949 Y-.8369 Z-.0253 I.2334 J-.0757X-.9812 Y-.8219 Z-.026 I.1875 J-.1582X-.909 Y-.7799 Z-.0289 I.1488 J-.1729G1 X-.8976 Y-.7762 Z-.0293G2 X-.8067 Y-.7668 Z-.0324 I.122 J-.7316X-.7085 Y-.7691 Z-.0358 I.0311 J-.741G1 X-.7068 Y-.769X-.6979 Y-.7585 Z-.036G3 X-.7052 Y-.7484 I-.0106 J0.G1 X-.7068 Y-.748X-.8431 Y-.7479 Z-.0407G2 X-.9105 Y-.7338 Z-.0431 I.0137 J.2345X-.9971 Y-.6779 Z-.0467 I.0811 J.2204G1 X-.9989 Y-.676G2 X-1.0084 Y-.6656 Z-.0472 I.1695 J.1626X-1.0401 Y-.5842 Z-.0502 I.2858 J.1585X-1.0479 Y-.4758 Z-.0538 I.3175 J.0771G3 X-1.0691 Y-.4085 I-.5399 J-.1337G2 X-1.0662 Y-.4844 I-.7387 J-.0671X-1.0745 Y-.5872 Z-.0573 I-.7416 J.0088G1 X-1.0762 Y-.5976 Z-.0577G2 X-1.1212 Y-.6791 Z-.0609 I-.2334 J.0757X-1.1358 Y-.6951 Z-.0616 I-.1884 J.1572X-1.2068 Y-.7366 Z-.0644 I-.1488 J.1729X-1.2194 Y-.7408 Z-.0649 I-.0778 J.2144X-1.309 Y-.7502 Z-.068 I-.122 J.7316X-1.4085 Y-.7479 Z-.0714 I-.0324 J.741G1 X-1.4102 Y-.748X-1.4191 Y-.7585 Z-.0715G3 X-1.4104 Y-.769 I.0106 J0.G1 X-1.4095 Y-.7691 Z-.0716X-1.4085G2 X-1.3073 Y-.7669 Z-.0751 I.0671 J-.7387X-1.2194 Y-.7762 Z-.0781 I-.0341 J-.7409X-1.2052 Y-.781 Z-.0787 I-.0652 J-.2186X-1.1358 Y-.8219 Z-.0814 I-.0794 J-.2138X-1.1201 Y-.8392 Z-.0822 I-.1738 J-.1732X-1.0762 Y-.9194 Z-.0854 I-.1895 J-.1559G1 X-1.0743 Y-.9316 Z-.0858G2 X-1.0691 Y-1.1085 Z-.0893 I-.7335 J-.1098G3 X-1.0479 I.0106 J0.G2 X-1.0508 Y-1.0321 I.7387 J.0671X-1.0424 Y-.9293 Z-.0929 I.7416 J-.0093G1 X-1.0408 Y-.9194 Z-.0932G2 X-.9954 Y-.8375 Z-.0964 I.2334 J-.0757X-.9812 Y-.8219 Z-.0972 I.188 J-.1576X-.9097 Y-.7802 Z-.1 I.1488 J-.1729G1 X-.8976 Y-.7762 Z-.1004G2 X-.8074 Y-.7668 Z-.1035 I.122 J-.7316X-.7085 Y-.7691 Z-.107 I.0318 J-.741G1 X-.7068 Y-.769X-.6979 Y-.7585 Z-.1071G3 X-.706 Y-.7482 I-.0106 J0.G1 X-.7072 Y-.7479X-.8431 Z-.1118G2 X-.9112 Y-.7336 Z-.1142 I.0137 J.2345X-.9977 Y-.6773 Z-.1178 I.0818 J.2202G1 X-.9989 Y-.676G2 X-1.0084 Y-.6656 Z-.1183 I.1695 J.1626X-1.0403 Y-.5834 Z-.1213 I.2858 J.1585X-1.0479 Y-.4758 Z-.1249 I.3177 J.0763G3 X-1.0691 Y-.4085 I-.5399 J-.1337G2 X-1.0661 Y-.4836 I-.7387 J-.0671X-1.0744 Y-.5864 Z-.1284 I-.7417 J.008G1 X-1.0762 Y-.5976 Z-.1288G2 X-1.1207 Y-.6785 Z-.132 I-.2334 J.0757X-1.1358 Y-.6951 Z-.1328 I-.1889 J.1566X-1.2061 Y-.7364 Z-.1355 I-.1488 J.1729X-1.2194 Y-.7408 Z-.136 I-.0785 J.2142X-1.3083 Y-.7502 Z-.1391 I-.122 J.7316X-1.4085 Y-.7479 Z-.1426 I-.0331 J.741G1 X-1.4102 Y-.748X-1.4191 Y-.7585 Z-.1427G3 X-1.4096 Y-.7691 I.0106 J0.G1 X-1.4085G2 X-1.3065 Y-.7669 Z-.1462 I.0671 J-.7387X-1.2194 Y-.7762 Z-.1492 I-.0349 J-.7409X-1.2044 Y-.7812 Z-.1498 I-.0652 J-.2186X-1.1358 Y-.8219 Z-.1525 I-.0802 J-.2136X-1.1196 Y-.8399 Z-.1533 I-.1738 J-.1732X-1.0762 Y-.9194 Z-.1565 I-.19 J-.1552G1 X-1.0741 Y-.9325 Z-.1569G2 X-1.0691 Y-1.1085 Z-.1604 I-.7337 J-.1089G3 X-1.0479 I.0106 J0.G2 X-1.0509 Y-1.0329 I.7387 J.0671X-1.0425 Y-.9301 Z-.164 I.7417 J-.0085G1 X-1.0408 Y-.9194 Z-.1644G2 X-.996 Y-.8381 Z-.1676 I.2334 J-.0757X-.9812 Y-.8219 Z-.1683 I.1886 J-.157X-.9105 Y-.7805 Z-.1711 I.1488 J-.1729X-.8976 Y-.7762 Z-.1716 I.0781 J-.2143X-.8082 Y-.7668 Z-.1747 I.122 J-.7316X-.7085 Y-.7691 Z-.1781 I.0326 J-.741G1 X-.7068 Y-.769X-.6979 Y-.7585 Z-.1782G3 X-.7068 Y-.748 I-.0106 J0.G1 X-.7085 Y-.7479 Z-.1783X-.8431 Z-.1829G2 X-.9121 Y-.7333 Z-.1853 I.0137 J.2345X-.9983 Y-.6767 Z-.1889 I.0827 J.2199G1 X-.9989 Y-.676G2 X-1.0084 Y-.6656 Z-.1894 I.1695 J.1626X-1.0405 Y-.5826 Z-.1924 I.2858 J.1585X-1.0479 Y-.4758 Z-.196 I.3179 J.0755G3 X-1.0691 Y-.4085 I-.5399 J-.1337G2 X-1.0661 Y-.4827 I-.7387 J-.0671X-1.0743 Y-.5855 Z-.1996 I-.7417 J.0071G1 X-1.0762 Y-.5976 Z-.2G2 X-1.1202 Y-.6779 Z-.2031 I-.2334 J.0757X-1.1358 Y-.6951 Z-.2039 I-.1894 J.156X-1.2053 Y-.7361 Z-.2067 I-.1488 J.1729X-1.2194 Y-.7408 Z-.2072 I-.0793 J.2139X-1.3075 Y-.7501 Z-.2102 I-.122 J.7316X-1.4085 Y-.7479 Z-.2137 I-.0339 J.7409G1 X-1.4102 Y-.748X-1.4191 Y-.7585 Z-.2138G3 X-1.4088 Y-.7691 I.0106 J0.G1 X-1.4085G2 X-1.3057 Y-.767 Z-.2173 I.0671 J-.7387X-1.2194 Y-.7762 Z-.2203 I-.0357 J-.7408X-1.2036 Y-.7815 Z-.2209 I-.0652 J-.2186X-1.1358 Y-.8219 Z-.2236 I-.081 J-.2133X-1.119 Y-.8405 Z-.2244 I-.1738 J-.1732X-1.0762 Y-.9194 Z-.2275 I-.1906 J-.1546X-1.074 Y-.9333 Z-.228 I-.7316 J-.122X-1.0691 Y-1.1085 Z-.2316 I-.7338 J-.1081G3 X-1.0479 I.0106 J0.G2 X-1.0509 Y-1.0338 I.7387 J.0671X-1.0426 Y-.931 Z-.2351 I.7417 J-.0076G1 X-1.0408 Y-.9194 Z-.2355G2 X-.9965 Y-.8388 Z-.2387 I.2334 J-.0757X-.9812 Y-.8219 Z-.2395 I.1891 J-.1563X-.9113 Y-.7808 Z-.2422 I.1488 J-.1729X-.8976 Y-.7762 Z-.2427 I.0789 J-.214X-.8091 Y-.7669 Z-.2458 I.122 J-.7316X-.7085 Y-.7691 Z-.2492 I.0335 J-.7409G1 X-.7068 Y-.769 Z-.2493X-.6979 Y-.7585G3 X-.7077 Y-.7479 I-.0106 J0.G1 X-.7085 Z-.2494X-.8431 Z-.254G2 X-.9129 Y-.7329 Z-.2564 I.0137 J.2345X-.9989 Y-.676 Z-.26 I.0835 J.2195G3 X-1.0546 Y-.7295 I.3291 J-.3986G1 X-1.0585 Y-.7256Y-.7914X-1.0546 Y-.7295G3 X-1.0576 Y-.7276 I-.0062 J-.0062G1 X-1.0944 Y-.713G3 X-1.1028 Y-.7142 I-.0032 J-.0082G1 X-1.1569 Y-.7548X-1.0622 Y-.8569G2 X-.9601 Y-.7622 I.4136 J-.3435G1 X-1.0548 Y-.6601G2 X-1.1126 Y-.7165 I-.3913 J.3431G1 X-1.1413 Y-.7051G3 X-1.1497 Y-.7061 I-.0032 J-.0081G2 X-1.4191 Y-.7585 I-.2175 J.3996G3 X-1.4085 Y-.7691 I.0106 J0.G2 X-1.0585 Y-1.1191 I.0825 J-.2675G3 X-1.0479 Y-1.1085 I0. J.0106G2 X-.6979 Y-.7585 I.2669 J.0831X-1.0084 Y-.6656 I-.0497 J.3991X-1.0691 Y-.4085 I.6094 J.2798X-1.1596 Y-.7064 I-.2777 J-.0784G1 X-1.1872 Y-.6886G3 X-1.1961 Y-.6882 I-.0048 J-.0074G2 X-1.4597 Y-.7118 I-.2011 J.7643G3 X-1.4552 Y-.8097 I.3759 J-.0317G2 X-1.1231 Y-.908 I.0939 J-.2931X-1.1052 Y-1.1598 I-.8754 J-.1886G3 X-1.0072 Y-1.1552 I.0317 J.376G2 X-.909 Y-.8231 I.293 J.0939X-.6572 Y-.8052 I.1886 J-.8754G3 X-.6618 Y-.7073 I-.376 J.0317G2 X-1.0033 Y-.5784 I-.1038 J.2418X-1.0072 Y-.3618 I1.2103 J.1305G3 X-1.1097 I-.0513 J-.3882G2 X-1.1961 Y-.6882 I-.2937 J-.097G0 Z1.G91 G28 Z0. M9G28 Y0. M5M30%

4axis post codes: (LESS ARCS)

%O0258(Cross Base- Op1.NC Post REV.45)(Source= CROSS BASE.MCX-9)(Part name= Cross Base)(Unproven Source File)(Posted on AUG.21.2015 AT 21*31PM)(Vertical 4Axis Universial Post)(*)(Material type= 7075 - T6)(Stock size= X.52 Y2.12 Z2.12)(*)(Total tool for Op1 is: 1 tool)(*)(TOOLS LIST)(T9=.1875, 3/16 EM, CB,)(3Flts, .313LOC, .38LOH)(==================)(*)(Work Offset Lists)(G54 B90.)(X0= Right edge of stock)(Y0= Rear edge of stock)(Z0= Top of surface Z-.010 miminal clean up)(*)N9(.1875, 3/16 EM, CB,)(3Flts, .313LOC, .38LOH)G0 G17 G40 G49 G80 G90G91 G28 Z0.T9 M6(2D High Speed ToolPath - Area Mill, CUT#5)G0 G90 G54(XY STK= .005)()X-1.4085 Y-.7479 S7500 M3G43 H9 Z1. M8(DOC= Z-.26)G90 Z.0625G1 Z-.0003 F50.X-1.4191 Y-.7585 Z-.0004X-1.4181 Y-.763X-1.4153 Y-.7666X-1.4112 Y-.7688X-1.4098 Y-.7691 Z-.0005X-1.4085G2 X-1.3081 Y-.7668 Z-.004 R.7417G1 X-1.2784 Y-.7687 Z-.005X-1.2488 Y-.7719 Z-.0061X-1.2194 Y-.7762 Z-.0071X-1.2059 Y-.7807 Z-.0075X-1.1871 Y-.7886 Z-.0082X-1.169 Y-.7982 Z-.0089X-1.1519 Y-.8093 Z-.0096X-1.1358 Y-.8219 Z-.0103X-1.128 Y-.8301 Z-.0107X-1.1206 Y-.8387 Z-.0111X-1.1067 Y-.8572 Z-.0119X-1.0946 Y-.877 Z-.0127X-1.0844 Y-.8978 Z-.0135X-1.0762 Y-.9194 Z-.0143X-1.0744 Y-.9309 Z-.0147X-1.0691 Y-.9751 Z-.0156X-1.0664 Y-1.0195 Z-.0164X-1.0665 Y-1.0641 Z-.0173X-1.0691 Y-1.1085 Z-.0182G3 X-1.0479 R.0106G1 X-1.0504 Y-1.0699X-1.0508 Y-1.0313X-1.0495 Y-.9969 Z-.0194X-1.0467 Y-.9626 Z-.0206X-1.0423 Y-.9285 Z-.0218X-1.0408 Y-.9194 Z-.0221X-1.0324 Y-.8972 Z-.0229X-1.0219 Y-.8759 Z-.0237X-1.0094 Y-.8557 Z-.0245X-.9949 Y-.8369 Z-.0253X-.9882 Y-.8293 Z-.0256X-.9812 Y-.8219 Z-.026X-.9647 Y-.809 Z-.0267X-.947 Y-.7976 Z-.0274X-.9284 Y-.7879 Z-.0282X-.909 Y-.7799 Z-.0289X-.8976 Y-.7762 Z-.0293X-.8674 Y-.7718 Z-.0303X-.8371 Y-.7687 Z-.0314X-.8067 Y-.7668 Z-.0324X-.7739 Y-.7661 Z-.0335X-.7412 Y-.7669 Z-.0347X-.7085 Y-.7691 Z-.0358X-.7068 Y-.769X-.6979 Y-.7585 Z-.036X-.6988 Y-.7542X-.7014 Y-.7506X-.7052 Y-.7484X-.7068 Y-.748X-.8431 Y-.7479 Z-.0407X-.866 Y-.7454 Z-.0415X-.8885 Y-.7407 Z-.0423X-.9105 Y-.7338 Z-.0431X-.9343 Y-.7235 Z-.044X-.9569 Y-.7106 Z-.0449X-.9779 Y-.6954 Z-.0458X-.9971 Y-.6779 Z-.0467X-.9989 Y-.676X-1.0084 Y-.6656 Z-.0472X-1.0214 Y-.6395 Z-.0482X-1.032 Y-.6123 Z-.0492X-1.0401 Y-.5842 Z-.0502X-1.0454 Y-.5574 Z-.0511X-1.0485 Y-.5303 Z-.052X-1.0493 Y-.5031 Z-.0529X-1.0479 Y-.4758 Z-.0538X-1.0575 Y-.4418X-1.0691 Y-.4085X-1.0666 Y-.4464X-1.0662 Y-.4844X-1.0674 Y-.5188 Z-.055X-1.0702 Y-.5531 Z-.0561X-1.0745 Y-.5872 Z-.0573X-1.0762 Y-.5976 Z-.0577G2 X-1.1212 Y-.6791 Z-.0609 R.2454G1 X-1.1283 Y-.6873 Z-.0612X-1.1358 Y-.6951 Z-.0616X-1.1521 Y-.7079 Z-.0623X-1.1694 Y-.7191 Z-.063X-1.1877 Y-.7287 Z-.0637X-1.2068 Y-.7366 Z-.0644X-1.2194 Y-.7408 Z-.0649G2 X-1.309 Y-.7502 Z-.068 R.7417G1 X-1.3422 Y-.7509 Z-.0691X-1.3754 Y-.7501 Z-.0703X-1.4085 Y-.7479 Z-.0714X-1.4102 Y-.748X-1.4191 Y-.7585 Z-.0715X-1.418 Y-.7632X-1.4149 Y-.767X-1.4104 Y-.769X-1.4095 Y-.7691 Z-.0716X-1.4085X-1.3748 Y-.7668 Z-.0728X-1.3411 Y-.7661 Z-.0739X-1.3073 Y-.7669 Z-.0751X-1.2779 Y-.7688 Z-.0761X-1.2486 Y-.7719 Z-.0771X-1.2194 Y-.7762 Z-.0781X-1.2052 Y-.781 Z-.0787X-1.1866 Y-.7889 Z-.0794X-1.1687 Y-.7984 Z-.0801X-1.1517 Y-.8094 Z-.0807X-1.1358 Y-.8219 Z-.0814X-1.1278 Y-.8304 Z-.0818X-1.1201 Y-.8392 Z-.0822X-1.1063 Y-.8576 Z-.083X-1.0944 Y-.8772 Z-.0838X-1.0843 Y-.8979 Z-.0846X-1.0762 Y-.9194 Z-.0854X-1.0743 Y-.9316 Z-.0858X-1.069 Y-.9756 Z-.0867X-1.0664 Y-1.0199 Z-.0876X-1.0665 Y-1.0642 Z-.0884X-1.0691 Y-1.1085 Z-.0893G3 X-1.0479 R.0106G1 X-1.0504 Y-1.0703X-1.0508 Y-1.0321X-1.0496 Y-.9977 Z-.0905X-1.0467 Y-.9634 Z-.0917X-1.0424 Y-.9293 Z-.0929X-1.0408 Y-.9194 Z-.0932X-1.0325 Y-.8974 Z-.094X-1.0221 Y-.8762 Z-.0948X-1.0097 Y-.8562 Z-.0956X-.9954 Y-.8375 Z-.0964X-.9885 Y-.8296 Z-.0968X-.9812 Y-.8219 Z-.0972X-.9648 Y-.8091 Z-.0979X-.9474 Y-.7978 Z-.0986X-.9289 Y-.7881 Z-.0993X-.9097 Y-.7802 Z-.1X-.8976 Y-.7762 Z-.1004X-.8677 Y-.7718 Z-.1014X-.8376 Y-.7687 Z-.1025X-.8074 Y-.7668 Z-.1035X-.7744 Y-.7661 Z-.1047X-.7414 Y-.7669 Z-.1058X-.7085 Y-.7691 Z-.107X-.7068 Y-.769X-.6979 Y-.7585 Z-.1071G3 X-.706 Y-.7482 R.0106G1 X-.7072 Y-.7479X-.8431 Z-.1118G2 X-.9112 Y-.7336 Z-.1142 R.2349G1 X-.935 Y-.7232 Z-.1151X-.9576 Y-.7103 Z-.116X-.9785 Y-.6949 Z-.1169X-.9977 Y-.6773 Z-.1178X-.9989 Y-.676X-1.0084 Y-.6656 Z-.1183X-1.0215 Y-.6392 Z-.1193X-1.0322 Y-.6117 Z-.1203X-1.0403 Y-.5834 Z-.1213X-1.0455 Y-.5568 Z-.1222X-1.0485 Y-.5299 Z-.1231X-1.0493 Y-.5028 Z-.124X-1.0479 Y-.4758 Z-.1249X-1.0575 Y-.4418X-1.0691 Y-.4085G2 X-1.0661 Y-.4836 R.7417G1 X-1.0673 Y-.518 Z-.1261X-1.07 Y-.5523 Z-.1272X-1.0744 Y-.5864 Z-.1284X-1.0762 Y-.5976 Z-.1288G2 X-1.1207 Y-.6785 Z-.132 R.2454G1 X-1.1281 Y-.687 Z-.1324X-1.1358 Y-.6951 Z-.1328X-1.1519 Y-.7078 Z-.1335X-1.1691 Y-.7189 Z-.1341X-1.1872 Y-.7285 Z-.1348X-1.2061 Y-.7364 Z-.1355X-1.2194 Y-.7408 Z-.136X-1.2489 Y-.7451 Z-.137X-1.2786 Y-.7482 Z-.1381X-1.3083 Y-.7502 Z-.1391G2 X-1.4085 Y-.7479 Z-.1426 R.7417G1 X-1.4102 Y-.748X-1.4191 Y-.7585 Z-.1427X-1.4179 Y-.7635X-1.4144 Y-.7673X-1.4096 Y-.7691X-1.4085X-1.3745 Y-.7668 Z-.1439X-1.3405 Y-.7661 Z-.145X-1.3065 Y-.7669 Z-.1462X-1.2774 Y-.7688 Z-.1472X-1.2483 Y-.7719 Z-.1482X-1.2194 Y-.7762 Z-.1492X-1.2119 Y-.7786 Z-.1495X-1.2044 Y-.7812 Z-.1498X-1.186 Y-.7891 Z-.1505X-1.1683 Y-.7985 Z-.1512X-1.1515 Y-.8095 Z-.1518X-1.1358 Y-.8219 Z-.1525X-1.1275 Y-.8307 Z-.1529X-1.1196 Y-.8399 Z-.1533X-1.106 Y-.8582 Z-.1541X-1.0942 Y-.8776 Z-.1549X-1.0843 Y-.8981 Z-.1557X-1.0762 Y-.9194 Z-.1565X-1.0741 Y-.9325 Z-.1569G2 X-1.0691 Y-1.1085 Z-.1604 R.7417G3 X-1.0479 R.0106G1 X-1.0504 Y-1.0707X-1.0509 Y-1.0329X-1.0497 Y-.9985 Z-.1616X-1.0469 Y-.9642 Z-.1628X-1.0425 Y-.9301 Z-.164X-1.0408 Y-.9194 Z-.1644X-1.0326 Y-.8976 Z-.1652X-1.0223 Y-.8766 Z-.166X-1.01 Y-.8567 Z-.1668X-.996 Y-.8381 Z-.1676X-.9888 Y-.8298 Z-.1679X-.9812 Y-.8219 Z-.1683X-.965 Y-.8092 Z-.169X-.9477 Y-.798 Z-.1697X-.9295 Y-.7884 Z-.1704X-.9105 Y-.7805 Z-.1711X-.8976 Y-.7762 Z-.1716X-.8679 Y-.7719 Z-.1726X-.8381 Y-.7687 Z-.1737X-.8082 Y-.7668 Z-.1747X-.7749 Y-.7661 Z-.1758X-.7417 Y-.7669 Z-.177X-.7085 Y-.7691 Z-.1781X-.7068 Y-.769X-.6979 Y-.7585 Z-.1782X-.699 Y-.7537X-.7022 Y-.7499X-.7068 Y-.748X-.7085 Y-.7479 Z-.1783X-.8431 Z-.1829X-.8665 Y-.7453 Z-.1837X-.8896 Y-.7404 Z-.1845X-.9121 Y-.7333 Z-.1853G2 X-.9983 Y-.6767 Z-.1889 R.2349G1 X-.9989 Y-.676X-1.0084 Y-.6656 Z-.1894X-1.0216 Y-.639 Z-.1904X-1.0324 Y-.6112 Z-.1914X-1.0405 Y-.5826 Z-.1924X-1.0456 Y-.5562 Z-.1933X-1.0486 Y-.5295 Z-.1942X-1.0493 Y-.5026 Z-.1951X-1.0479 Y-.4758 Z-.196X-1.0575 Y-.4418X-1.0691 Y-.4085X-1.0667 Y-.4456X-1.0661 Y-.4827X-1.0672 Y-.5171 Z-.1972X-1.0699 Y-.5514 Z-.1984X-1.0743 Y-.5855 Z-.1996X-1.0762 Y-.5976 Z-.2G2 X-1.1202 Y-.6779 Z-.2031 R.2454G1 X-1.1278 Y-.6867 Z-.2035X-1.1358 Y-.6951 Z-.2039X-1.1517 Y-.7076 Z-.2046X-1.1687 Y-.7187 Z-.2053X-1.1866 Y-.7282 Z-.206X-1.2053 Y-.7361 Z-.2067X-1.2194 Y-.7408 Z-.2072X-1.2486 Y-.7451 Z-.2082X-1.278 Y-.7482 Z-.2092X-1.3075 Y-.7501 Z-.2102X-1.3412 Y-.7509 Z-.2114X-1.3749 Y-.7501 Z-.2125X-1.4085 Y-.7479 Z-.2137X-1.4102 Y-.748X-1.4191 Y-.7585 Z-.2138X-1.4177 Y-.7637X-1.414 Y-.7676X-1.4088 Y-.7691X-1.4085X-1.3743 Y-.7668 Z-.215X-1.34 Y-.7661 Z-.2161X-1.3057 Y-.767 Z-.2173X-1.2768 Y-.769 Z-.2183X-1.248 Y-.772 Z-.2193X-1.2194 Y-.7762 Z-.2203X-1.2115 Y-.7787 Z-.2206X-1.2036 Y-.7815 Z-.2209X-1.1854 Y-.7893 Z-.2216X-1.1679 Y-.7987 Z-.2223X-1.1513 Y-.8096 Z-.2229X-1.1358 Y-.8219 Z-.2236X-1.1272 Y-.831 Z-.224X-1.119 Y-.8405 Z-.2244X-1.1056 Y-.8587 Z-.2252X-1.0939 Y-.878 Z-.2259X-1.0841 Y-.8983 Z-.2267X-1.0762 Y-.9194 Z-.2275X-1.074 Y-.9333 Z-.228X-1.0689 Y-.9769 Z-.2289X-1.0664 Y-1.0208 Z-.2298Y-1.0647 Z-.2307X-1.0691 Y-1.1085 Z-.2316G3 X-1.0479 R.0106G2 X-1.0509 Y-1.0338 R.7417G1 X-1.0497 Y-.9994 Z-.2328X-1.047 Y-.9651 Z-.2339X-1.0426 Y-.931 Z-.2351X-1.0408 Y-.9194 Z-.2355X-1.0326 Y-.8978 Z-.2363X-1.0225 Y-.877 Z-.2371X-1.0104 Y-.8573 Z-.2379X-.9965 Y-.8388 Z-.2387X-.989 Y-.8302 Z-.2391X-.9812 Y-.8219 Z-.2395X-.9652 Y-.8093 Z-.2402X-.9481 Y-.7982 Z-.2409X-.9301 Y-.7887 Z-.2415X-.9113 Y-.7808 Z-.2422X-.8976 Y-.7762 Z-.2427X-.8682 Y-.7719 Z-.2437X-.8387 Y-.7688 Z-.2448X-.8091 Y-.7669 Z-.2458X-.7755 Y-.7661 Z-.2469X-.742 Y-.7669 Z-.2481X-.7085 Y-.7691 Z-.2492X-.7068 Y-.769 Z-.2493X-.6979 Y-.7585X-.6992 Y-.7534X-.7027 Y-.7496X-.7077 Y-.7479X-.7085 Z-.2494X-.8431 Z-.254X-.8668 Y-.7453 Z-.2548X-.8902 Y-.7403 Z-.2556X-.9129 Y-.7329 Z-.2564X-.9366 Y-.7223 Z-.2573X-.9591 Y-.7092 Z-.2582X-.9799 Y-.6937 Z-.2591X-.9989 Y-.676 Z-.26X-1.0184 Y-.6929X-1.0369 Y-.7107X-1.0546 Y-.7295X-1.0585 Y-.7256Y-.7914X-1.0546 Y-.7295X-1.056 Y-.7284X-1.0576 Y-.7276X-1.0944 Y-.713X-1.0988 Y-.7125X-1.1028 Y-.7142X-1.1569 Y-.7548X-1.0622 Y-.8569G2 X-.9601 Y-.7622 R.5376G1 X-1.0548 Y-.6601X-1.0731 Y-.6799X-1.0924 Y-.6987X-1.1126 Y-.7165X-1.1413 Y-.7051X-1.1456 Y-.7046X-1.1497 Y-.7061G2 X-1.4191 Y-.7585 R.455G3 X-1.4085 Y-.7691 R.0106G2 X-1.0585 Y-1.1191 R.2799G3 X-1.0479 Y-1.1085 R.0106G2 X-.6979 Y-.7585 R.2795X-1.0084 Y-.6656 R.4022G1 X-1.0255 Y-.6247X-1.04 Y-.5828X-1.0516 Y-.5401X-1.0603 Y-.4966X-1.0662 Y-.4527X-1.0691 Y-.4085X-1.0625 Y-.4376X-1.0589 Y-.4673X-1.0584 Y-.4972X-1.061 Y-.527X-1.0667 Y-.5563X-1.0754 Y-.5849X-1.087 Y-.6125X-1.1014 Y-.6387X-1.1184 Y-.6632X-1.1379 Y-.6859X-1.1596 Y-.7064X-1.1872 Y-.6886X-1.1901 Y-.6874X-1.1932 Y-.6873X-1.1961 Y-.6882X-1.2393 Y-.6983X-1.2829 Y-.7059X-1.3269 Y-.7111X-1.3711 Y-.7138X-1.4154 Y-.714X-1.4597 Y-.7118X-1.461 Y-.7363X-1.4606 Y-.7609X-1.4587 Y-.7854X-1.4552 Y-.8097X-1.4229 Y-.8012X-1.3898 Y-.7963X-1.3564 Y-.7951X-1.323 Y-.7974X-1.2901 Y-.8034X-1.2581 Y-.8128X-1.2273 Y-.8258X-1.198 Y-.8419X-1.1707 Y-.8612X-1.1456 Y-.8833X-1.1231 Y-.908X-1.1138 Y-.9578X-1.1074 Y-1.008X-1.1038 Y-1.0586X-1.1031 Y-1.1092X-1.1052 Y-1.1598X-1.0806 Y-1.1611X-1.056 Y-1.1607X-1.0315 Y-1.1588X-1.0072 Y-1.1552G2 X-.909 Y-.8231 R.3077G1 X-.8592 Y-.8138X-.809 Y-.8074X-.7584 Y-.8038X-.7078 Y-.8031X-.6572 Y-.8052X-.6559 Y-.7807X-.6563 Y-.7561X-.6582 Y-.7316X-.6618 Y-.7073G2 X-1.0033 Y-.5784 R.2631G1 X-1.0079 Y-.5244X-1.0101 Y-.4702X-1.0099 Y-.416X-1.0072 Y-.3618X-1.0328 Y-.3593X-1.0585 Y-.3584X-1.0841 Y-.3593X-1.1097 Y-.3618X-1.1012 Y-.3931X-1.0959 Y-.4252X-1.0941 Y-.4576X-1.0957 Y-.49X-1.1006 Y-.5221X-1.1089 Y-.5534X-1.1205 Y-.5838X-1.1351 Y-.6127X-1.1527 Y-.64X-1.1731 Y-.6653X-1.1961 Y-.6882G0 Z1. M9G91 G28 Z0. M5G28 Y0.G0 G90 G54 X0.M1M30%
Link to comment
Share on other sites

Are these settings the same

 

ltol_m       : 0.05  #Length tolerance for arccheck, metric

vtol_m       : 0.0025#System tolerance, metric

Hi Greg Williams,

   Yes, checked as you instructed.  They are the same, please see below.

 

ps: Is there any other ways that we can make the codes short as the 3axis post processor?

 

Thank you for your help, Greg Williams.

# --------------------------------------------------------------------------# Additional General Output Settings# --------------------------------------------------------------------------tooltable$     : 1     #Read for tool table and pwrtt - use tool_table to disableskp_lead_flgs$ : 0  #Do NOT use v9 style contour flagsget_1004$      : 1     #Find gcode 1004 with getnextop?rpd_typ_v7$    : 0     #Use Version 7 style contour flags/processing?strtool_v7$    : 2     #Use Version 7 toolname? [0=Filename,1=Name,2=Path\Name]tlchng_aft$    : 2     #Delay call to toolchange until move line cant_tlchng$   : 1    #Ignore cantext entry on move with tlchng_aft newglobal$     : 1     #Error checking for global variablesgetnextop$     : 1     #Build the next variable tableToolSequenceNumber         : 0maxfeedpm    : 500   #SET_BY_MD Limit for feed in inch/minltol_m       : 0.05  #Length tolerance for arccheck, metricvtol_m       : 0.0025#System tolerance, metricmaxfeedpm_m  : 10000 #SET_BY_MD Limit for feed in mm/minmin_speed    : 50    #SET_BY_MD Minimum spindle speedprogname$    : 1     #Use uppercase for program name (sprogname)prog_stop    : 1     #Program stop at toolchange: 0=None, 1=M01, 2 = M00tool_info    : 2     #Output tooltable information?                     #0 = Off - Do not output any tool comments or tooltable                     #1 = Tool comments only                     #2 = Tooltable in header - no tool comments at T/C                     #3 = Tooltable in header - with tool comments at T/Ctlchg_home   : no$   #Zero return X and Y axis prior to tool change?comment_mode : 2     #0 = Truncate For comments that exceed Maximum Characters in NC comment                     #0=Truncate                     #1=Shorten                     #2=Break output (you must set "max nc characters" in CD to 256, otherwise                     #  MP will truncate the comment coming from the NCI file. Use internal                     #  comm_brk_len value for controlling the string length. String length                     #  is total number of characters, including the comment start/end characterscomm_brk_len : 80    #Length of output comment string, when 'comment_mode' is set to '2'str_len       : 0     #Length of stringstr_brk       : 0     #Calculate NUmber of break passessop_com       : ""   #String for Operation Comment for Transformwcs_comm      : 0    #Use to force pwcs at commentmanual_entry_flg : 0# The following three initializations are used for full arc and helix arc output when the CD#   is set to output R or signed R for arcsarctype$     : 2     #Arc center type XY plane 1=abs, 2=St-Ctr, 3=Ctr-St, 4=unsigned inc.arctypexz$   : 2     #Arc center type XZ plane 1=abs, 2=St-Ctr, 3=Ctr-St, 4=unsigned inc.arctypeyz$   : 2     #Arc center type YZ plane 1=abs, 2=St-Ctr, 3=Ctr-St, 4=unsigned inc.tap_feedtype       : 1     #0 = Units Per Minute (G94)                           #1 = Units Per Revolution (G95)
Link to comment
Share on other sites

Are these settings the same

 

ltol_m       : 0.05  #Length tolerance for arccheck, metric

vtol_m       : 0.0025#System tolerance, metric

Hi Greg,

   I think I found it, it is all about MACHINE DEFINITION settings.  Below here is the setting that I made it happened within shorter G-Codes.

 

 

PS:  Thank you for your suggestion, Greg.

 

https://drive.google.com/file/d/0B4UZsmondnEzZEJ1N3VCSlllS1U/view?usp=sharing

 

 

%
O0258(Cross Base- Op1.NC Post REV.100)
(Source= CROSS BASE.MCX-9)
(Part name= Cross Base)
(Unproven Source File)
(Posted on AUG.22.2015 AT 13*55PM)
(Vertical)
(*)
(Material type= 7075 - T6)
(Stock size= X.52 Y2.12 Z2.12)
(*)
(Total tool for Op1 is: 1 tool)
(*)
(TOOLS LIST)
(T9=.1875, 3/16 EM, CB,)
(3Flts, .313LOC, .38LOH)
(==================)
(*)
(Work Offset Lists)
(G54 B90.)
(X0= Right edge of stock)
(Y0= Rear edge of stock)
(Z0= Top of surface Z-.010 miminal clean up)
(*)
N9(.1875, 3/16 EM, CB,)
(3Flts, .313LOC, .38LOH)
G0 G17 G40 G49 G80 G90 M17
G91 G28 Z0.
T9 M6(2D High Speed ToolPath - Area Mill, CUT#5)
G90 G54(XY STK= .005)
()
X-.7085 Y-.7585 S7500 M3
G43 H9 Z1. M8(DOC= Z-.26)
G90 Z.0625
G1 Z-.0004 F50.
X-.8438 Z-.0051
G2 X-.9141 Y-.7436 Z-.0075 R.2518
X-1.0016 Y-.6889 Z-.0111 R.2518
G1 X-1.0094 Y-.6811 Z-.0115
G2 X-1.0482 Y-.5969 Z-.0147 R.31
X-1.0585 Y-.4762 Z-.0182 R.31
G1 Y-.4085
Y-.5438 Z-.0199
G2 X-1.0668 Y-.5971 Z-.0218 R.2304
X-1.1161 Y-.6877 Z-.0253 R.2304
G1 X-1.1171 Y-.6888 Z-.0254
G2 X-1.1653 Y-.7297 Z-.0276 R.2303
X-1.2036 Y-.7423 Z-.0289 R.5193
X-1.4085 Y-.7585 Z-.0324 R.5194
G1 X-1.3054
X-1.2732 Z-.0335
G2 X-1.2032 Y-.7722 Z-.036 R.2304
X-1.1166 Y-.8282 Z-.0395 R.2303
X-1.0873 Y-.8653 Z-.0412 R.2303
X-1.0703 Y-.9203 Z-.0431 R.5193
X-1.0585 Y-1.1085 Z-.0467 R.5193
G1 Y-1.0227
Y-.9732 Z-.0484
G2 X-1.0502 Y-.9199 Z-.0502 R.2304
X-1.001 Y-.8293 Z-.0538 R.2304
X-.9517 Y-.7873 Z-.056 R.2304
X-.9135 Y-.7747 Z-.0573 R.5193
X-.812 Y-.7564 Z-.0609 R.5194
X-.7085 Y-.7585 Z-.0644 R.5193
G1 X-.7089
X-.8438 Z-.0691
G2 X-.914 Y-.7436 Z-.0715 R.2518
X-1.0015 Y-.689 Z-.0751 R.2518
G1 X-1.0094 Y-.6811 Z-.0755
G2 X-1.0482 Y-.597 Z-.0787 R.31
X-1.0585 Y-.4762 Z-.0822 R.3101
G1 Y-.4085
Y-.5438 Z-.0839
G2 X-1.0669 Y-.5972 Z-.0858 R.2304
X-1.1162 Y-.6878 Z-.0893 R.2303
G1 X-1.1171 Y-.6888 Z-.0894
G2 X-1.1653 Y-.7297 Z-.0916 R.2303
X-1.2037 Y-.7423 Z-.0929 R.5193
X-1.4085 Y-.7585 Z-.0964 R.5193
G1 X-1.3055
X-1.2732 Z-.0976
G2 X-1.2033 Y-.7721 Z-.1 R.2304
X-1.1167 Y-.8281 Z-.1035 R.2304
X-1.0873 Y-.8653 Z-.1052 R.2303
X-1.0703 Y-.9202 Z-.1071 R.5193
X-1.0585 Y-1.1085 Z-.1107 R.5193
G1 Y-1.0226
Y-.9732 Z-.1124
G2 X-1.0502 Y-.9198 Z-.1142 R.2304
X-1.0009 Y-.8292 Z-.1178 R.2304
X-.9517 Y-.7873 Z-.12 R.2304
X-.9134 Y-.7747 Z-.1213 R.5193
X-.7085 Y-.7585 Z-.1249 R.5194
G1 X-.8115
X-.8438 Z-.126
G2 X-.9136 Y-.7438 Z-.1284 R.2518
X-1.0012 Y-.6894 Z-.132 R.2518
G1 X-1.0094 Y-.6811 Z-.1324
G2 X-1.048 Y-.5975 Z-.1355 R.31
X-1.0585 Y-.4762 Z-.1391 R.31
G1 Y-.4085
Y-.5438 Z-.1408
G2 X-1.067 Y-.5977 Z-.1427 R.2304
X-1.1165 Y-.6881 Z-.1462 R.2303
G1 X-1.1171 Y-.6888
G2 X-1.1653 Y-.7297 Z-.1484 R.2303
X-1.2042 Y-.7424 Z-.1498 R.5193
X-1.4085 Y-.7585 Z-.1533 R.5193
G1 X-1.306
X-1.2732 Z-.1545
G2 X-1.2038 Y-.772 Z-.1569 R.2304
X-1.117 Y-.8277 Z-.1604 R.2303
X-1.0873 Y-.8653 Z-.1621 R.2304
X-1.0704 Y-.9197 Z-.164 R.5193
X-1.0585 Y-1.1085 Z-.1676 R.5193
G1 Y-1.0222
Y-.9732 Z-.1692
G2 X-1.05 Y-.9194 Z-.1711 R.2304
X-1.0006 Y-.8289 Z-.1747 R.2303
X-.9517 Y-.7873 Z-.1769 R.2304
X-.9129 Y-.7746 Z-.1782 R.5193
X-.7085 Y-.7585 Z-.1818 R.5193
G1 X-.811
X-.8438 Z-.1829
G2 X-.9131 Y-.7439 Z-.1853 R.2518
X-1.0008 Y-.6897 Z-.1889 R.2518
G1 X-1.0094 Y-.6811 Z-.1893
G2 X-1.0479 Y-.5979 Z-.1924 R.31
X-1.0585 Y-.4762 Z-.196 R.31
G1 Y-.4085
Y-.5438 Z-.1977
G2 X-1.0671 Y-.5981 Z-.1996 R.2304
X-1.1168 Y-.6885 Z-.2031 R.2304
G1 X-1.1171 Y-.6888
G2 X-1.1653 Y-.7297 Z-.2053 R.2303
X-1.2046 Y-.7426 Z-.2067 R.5193
X-1.4085 Y-.7585 Z-.2102 R.5194
G1 X-1.3065
X-1.2732 Z-.2114
G2 X-1.2042 Y-.7718 Z-.2138 R.2304
X-1.1174 Y-.8274 Z-.2173 R.2304
X-1.0873 Y-.8653 Z-.219 R.2303
X-1.0705 Y-.9193 Z-.2209 R.5193
X-1.0585 Y-1.1085 Z-.2244 R.5193
G1 Y-1.0217
Y-.9732 Z-.2261
G2 X-1.0499 Y-.9189 Z-.228 R.2304
X-1.0003 Y-.8285 Z-.2316 R.2304
X-.9517 Y-.7873 Z-.2338 R.2304
X-.9125 Y-.7745 Z-.2351 R.5193
X-.7085 Y-.7585 Z-.2387 R.5193
G1 X-.8106
X-.8438 Z-.2398
G2 X-.9127 Y-.7441 Z-.2422 R.2518
X-1.0005 Y-.69 Z-.2458 R.2518
G1 X-1.0094 Y-.6811 Z-.2462
G2 X-1.0478 Y-.5984 Z-.2493 R.31
X-1.0585 Y-.4762 Z-.2529 R.3101
G1 Y-.4085
Y-.5438 Z-.2545
G2 X-1.0672 Y-.5986 Z-.2564 R.2304
X-1.1171 Y-.6888 Z-.26 R.2304
G3 X-1.0692 Y-.7172 R.0382
G2 X-1.0635 Y-.7368 R.0117
G1 X-1.0853 Y-.7585
G3 X-1.0317 R.0268
X-1.0771 Y-.7388 R.0489
X-1.1653 Y-.7297 R.0515
G2 X-1.2732 Y-.7585 R.52
X-1.0585 Y-.9732 R.2537
X-.8438 Y-.7585 R.2537
X-1.0585 Y-.5438 R.2535
X-1.1556 Y-.7139 R.1886
G3 X-1.2657 Y-.7069 R.0967
G1 X-1.4597 Y-.7073
Y-.8097
X-1.2732
G2 X-1.1101 Y-.9657 R.1625
G1 X-1.1097 Y-1.1598
X-1.0072
Y-.9732
G2 X-.8513 Y-.8101 R.1624
G1 X-.6572 Y-.8097
Y-.7073
G2 X-.9714 Y-.6467 R.3832
X-1.0072 Y-.3573 R.5039
G1 X-1.1097
Y-.5438
G2 X-1.2025 Y-.6915 R.163
G0 Z1. M9
G91 G28 Z0. M5
G28 Y0.
G90 G54 X0.
M1
M30
%
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...