Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I have 1 library I use most of the time. I copy the tools and label them with different materials. Each tool then has a good starting point for SFM and IMP according to the material.
If you work on the shop floor its best to have a high desk with a tall chair. I go back and forth between the computer and machines and also sit down when programming gets really involved. We custom built all of our desk...
Depending on the depth i use:
Helix bore to rough
Circle mill with wear to finish
I've had my fair share of scrap using the lead in/out options on a contour
Thanks Pete! In the past the registration would happen automatically. Here lately I have had to manually register after every install/update. We have 17 seats so its not that fun...
On the "leads" you can set may lead in lead out options. On a hole diameter I use "line and arc/arc and line" with a radius value. On a straight line on and off I usually extend the lines, it makes it much easier to chain also...
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.