Good morning, can anyone pass me a Sample RemMF for HAAS machines I've already tested? I need to generate the program to test Probe on the machine, see attached file. Thank you Renishaw.mcam

I'm trying to create a Lathe Machine Simulations to but I'm having some problems. First had problems with the axes, assumed as the axes of a Milling. Now this giving me anguns errors when I start the simulation and can not simulate. Does anyone have a tutorial to create Lathe or some that I can make available to compare? I'm trying to create a Lathe HAAS ST10 with C axis.

Thank you very much

Sorry for my english! I'm saying I change the machine GENERIC HAAS TL 2X LATHE MM to LATHE DEFAULT MM and already generates the code with the correct X axis. Canned Cycles but do not match, for example threaded cycle is not correct. Do you think moving my system works (WCS) longer correct? I have the WCS + D + Z.

But I doing to replace another machine already generates correctly, so does not generate the correct Canned (threading cycles, ...)

Hello everybody, Someone can help me on the POST Generic Haas TL 2X Lathe? This me generate all the code on the negative X-axis (X-20.) Instead of positive (X20). thank you

I hope the picture helps.

You need to leave the F= RPM * pitch or F= Pitch Código Fanuc 21 Série mm T5 M6 G0 G90 G54 X0. Y0. S500 M3 G43 H5 Z5. G98 G84 Z-6. R5. F250. or F0.5 G80 G0 G91 G28 Z0. G28 Y0. M5 M30

Hi, have you tried using F = the pitch of the thread M3 = 0.5 F = 0.5 soon, so I use a Fanuc 21 Series controller

Hello, I installed the standard folders. C: \ Users \ administrator \ Documents \ my mcamx8 \ CONFIG C: \ Users \ Public \ Documents \ shared mcamx8

Hello, I'm trying to install Mastecam X8, installs fine, install the drivers from the SIM but when starting the following message appears. I do not know what happens, someone already had this problema?

Good Morning, I've been trying to simulate my pieces in MachSIM, but has complete machines, only has extrutura (table, column machine), need of extruded out of the machines. I found some desnhos the Net already converted to the STL, but asks me a XML, and I do not know how to create this XML. If someone has the machines created and want to share thanked. Machines: Haas VF1 Haas Super Mini Mill Haas ST10 EMCO Mill 155 Thank you

Hi JParis, Tell if this problem already solved?

Hi, You could solve your problem? I'm having the same problem, the Z value with WCS. I am using the variable Z-MIN, but not working with WCS, but when I have the part at origin works well.

I think you're wrong some configuration of Arc, check if the control definition is equal to the Generic Post. Hope this helps.