Excellent post as always Ron, and great to see you.

Only on contour toolpaths again this morning forgot coolant went back turned coolant on posted setup man caught it at the machine.

On contour paths watch your depth cut setting if you reopen the tool path it will default back.

I found the problem. Thanks #rd_params$ # Rem DKS #if write_ops = 0, result=mprint(swriteopserror, 2) #Write NC Operation information MUST be enabled in CD Rem DKS

Yes I still get error just postig one operation. Thanks

I had the error in X6 as well hope X7 would fix it.

Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 4764 StartFragment: 314 EndFragment: 4732 StartSelection: 314 EndSelection: 314 30 Sep 2013 08:41:33 AM - <0> - Report created. 30 Sep 2013 08:41:33 AM - <2> - Initialize posting log file 30 Sep 2013 08:41:33 AM - <2> - Using MP run version 16.00 and post components version 16.00 30 Sep 2013 08:41:33 AM - <2> - Initiate opening the post processor file(s). 30 Sep 2013 08:41:33 AM - <2> - Y:\TFO DEPARTMENTS\CNC\MC X7 POST\PUMA LATHE POST\PUMA 400.PST 30 Sep 2013 08:41:33 AM - <2> - The post processor file has been successfully opened. 30 Sep 2013 08:41:33 AM - <2> - Post version information (input): 30 Sep 2013 08:41:33 AM - <2> - UPDATEPOST Version 16. was used to modify this file. 30 Sep 2013 08:41:33 AM - <2> - The file was modified by this product on 29 May 2013 10:21:32 30 Sep 2013 08:41:33 AM - <2> - The post was written to run with Mastercam Version 16. 30 Sep 2013 08:41:33 AM - <2> - The post product type is Mill/Turn. 30 Sep 2013 08:41:34 AM - <2> - Initialization of pre-defined post variables, strings, postblocks was successful. 30 Sep 2013 08:41:34 AM - <2> - Search for defined post variables, strings, postblocks was successful. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'ltol$' was re-initialized from 0.002 to 0.0005 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'atol$' was re-initialized from 0.01 to 0.5 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'maxnccomment$' was re-initialized from 256. to 120. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'dec_seq_left$' was re-initialized from 3. to 4. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'sub_seq_typ$' was re-initialized from 0. to 1. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'tplanemode$' was re-initialized from 2. to 1. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'arcoutput$' was re-initialized from 1. to 2. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'arcoutputxz$' was re-initialized from 1. to 2. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'arcoutputyz$' was re-initialized from 1. to 2. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'larctype$' was re-initialized from 6. to 2. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'larcoutput$' was re-initialized from 1. to 0. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'larctypexz$' was re-initialized from 1. to 2. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'larctypeyz$' was re-initialized from 6. to 2. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'larcoutputyz$' was re-initialized from 1. to 0. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'breakarcs$' was re-initialized from 1. to 2. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'breakarcsxz$' was re-initialized from 1. to 2. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'breakarcsyz$' was re-initialized from 1. to 2. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'lbreakarcsxz$' was re-initialized from 1. to 2. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'arccheck$' was re-initialized from 1. to 111. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'larccheck$' was re-initialized from 1. to 111. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'rotfeed4$' was re-initialized from 2. to 1. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'rotfeed5$' was re-initialized from 3. to 1. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'lrotfeed4$' was re-initialized from 2. to 1. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'lrotfeed5$' was re-initialized from 0. to 1. 30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'peckacel$' was re-initialized from 0. to 1. 30 Sep 2013 08:41:34 AM - <2> - PARAMETER DATA - The requested parameter data object was not created: Operation parameters 30 Sep 2013 08:41:34 AM - <2> - Successful completion of posting process!

I have been trying to get rid of a post error code is good but always an error.This is a lathe post. PARAMETER DATA - The requested parameter data object was not created: Operation parameters Any help would be appreciated Thanks Don

From what I am seeing the depth cut fix seems to be the reason it will only check the 1st operation. Is anyone else seeing this?

ok I got rid of the errors but it is only checking 1st operation and i do have it in all three places psof$, ptlchg0$, and ptlchg$ (ptlchg_errorcheck #Check for common toolchange errors)

For some reason I am getting post errors now I am sure its something I did. 27 Aug 2013 07:06:41 AM - <2> - PST LINE (2015,2015) - The function can not be nested in a formula[36] 27 Aug 2013 07:06:41 AM - <2> - PST LINE (2016,2016) - The function can not be nested in a formula[34] 27 Aug 2013 07:06:41 AM - <2> - PST LINE (2016,2016) - The variable/string declaration is a duplicate, , Duplicate assignment of label 27 Aug 2013 07:06:41 AM - <2> - PST LINE (2017,2017) - The variable/string declaration is a duplicate, , Duplicate assignment of label 27 Aug 2013 07:06:41 AM - <2> - PST LINE (2018,2018) - The variable/string declaration is a duplicate, , Duplicate assignment of label 27 Aug 2013 07:06:41 AM - <2> - PST LINE (2015,2015) - The math calculation/formula has an error

What he has is a pipe and the letter "L" is cutout thru the part if you roll the geo you can not extrude cut. He has to create a model for an outside service.

I think he said draw?

Ron I know the work you put in A+++ good to see you again and glad I am back here.

Verisurf is a very good tool for that.