Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

ajmer

In-House Solutions
  • Posts

    498
  • Joined

  • Last visited

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

3,594 profile views

ajmer's Achievements

Apprentice

Apprentice (3/14)

  • Reacting Well Rare
  • Very Popular Rare
  • First Post Rare
  • Collaborator Rare
  • Dedicated Rare

Recent Badges

128

Reputation

  1. yeah waterline works well its the opti rough that has a hard time keeping down
  2. make sure 2d/3d is set just in case it is set to 2d and projecting geometry to a z value
  3. i used an mpmaster i had i changed this search for and uncomment this line # sav_rot_on_x = rot_on_x #Uncomment this line to output rotary axis value even when it's not used then at the end of ptlchg0$ i added a pfcout on that line ptlchg0$ #Call from NCI null tool change (tool number repeats) was this else, [ pbld, n$, sgabsinc, [if not(index), pwcs], pfxout, pfyout, pfzout, pcout, e$ ] ] i changed to else, [ pbld, n$, sgabsinc, [if not(index), pwcs], pfcout, pfxout, pfyout, pfzout, pcout, e$ ] ] gave me this output N5 G00 G17 G20 G40 G80 G90 N10 G91 G28 Z0. N15 (COMPENSATION TYPE - COMPUTER) N20 T239 M06 ( 1/2 FLAT ENDMILL) N25 (MAX - Z.25) N30 (MIN - Z0.) N35 G00 G17 G90 G54 B0. X-.25 Y.5 S1069 M03 N40 G43 H239 Z.25 N45 Z.2 N50 G94 G01 Z0. F6.42 N55 X-.75 N60 G03 X-1.25 Y0. I0. J-.5 N65 X1.25 I1.25 J0. N70 X-1.25 I-1.25 J0. N75 X-.75 Y-.5 I.5 J0. N80 G01 X-.25 N85 Z.2 N90 G00 Z.25 N95 G55 B0. X-.25 Y.5 Z.25 N100 Z.2 N105 G01 Z0. N110 X-.75 N115 G03 X-1.25 Y0. I0. J-.5 N120 X1.25 I1.25 J0. N125 X-1.25 I-1.25 J0. N130 X-.75 Y-.5 I.5 J0. N135 G01 X-.25 N140 Z.2 N145 G00 Z.25 N150 M05 N155 G91 G28 Z0. N160 G28 Y0. B0
  4. no problem really not sure why you would ever have that enabled
  5. there is an exact mode somewhere in the parameters try that its prob set to approximate
  6. i just ctrl clicked the wall of the holes, not the edges but the wall and it picks all the holes with the same dia
  7. i added a hole that is shallower than the rest and it worked correctly see file part.mcam
  8. +10000000000000000000000
  9. here is a file using old school ruled ajmer_ihs_test.emcam
  10. i think this is what Ron was mentioning spiral_ajmer_ihs_IM42333.mcam
  11. if you dont have multi axis you could use rollidie its a bit wonky as you cannot really change parameters, it doenst regen correctly and it doesnt have lead in/out either if you want to make changes do the toolpath again its a chook ajmer_ihs_IM42333.mcam
  12. i think that your total tolerance is too big not sure if that is what is causing these issues but try changing it to 0.002" or even 0.001" and run it thru vericut adn see if the same errors happen

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...