Posts are provided 'as is' with no warranties, either expressed or implied, that code generated through use of the posts is safe or suitable for your machine tool.  Please employ your own established code verification procedures prior to running code on your machine tool.  Posts are generic and are intended for modification to the machine tool requirements, operator preference, and established internal standards.  In short, use at your own risk.

Mplmaster - Master G-Code Post - Mastercam X4

Based on CNC Software's master lathe post - Mplfan - this post has additional features.

eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor.  Please do not email post requests or support questions.  For post requests or support contact your local reseller.

Download X4 (Full X4 Version with Machine Def / Control Def integration)

Click here to download Mplmaster for X4.  It's our master configurable lathe post.  The download also contains 2 sample part transfers and related notes.

Email feedback to our Post Department.

Updated June 9, 2009

Special Features

X4 specific parameter updates to maintain previous functionality
X coolant support
X comment support
Compatible with machine def changes for machine configurations 
      Y-axis
      C-axis and required output type
File header tool table
Sets work offset style in post, not in Misc Values
G12.1, G07.1 output format
G12.1 paths don't need to start at C0, approach with X and C then z
Cross mill from top or front plane
Part transfer with spindle synch
Spindle synch roughed in
Indexing mode setup
Lathe and Mill drill cycles setup, longhand output for drill and peck (No G81/G82)
Enhanced tapping
Type 1 and Type 2 G71 roughing support
Feed G code at toolchange
End Constant Surface Speed paths with RPM output
Mill/Drill feed in Unit/Rev support
Canned threading options
       thdang = rad2deg$ * thdangle$     #lead-in angle
       thdang = rad2deg$ * thda1$        #half of the thread angle
       thdang = rad2deg$ * thda2$        #thread angle (full included angle)
Forced R output for arcs in G07.1
Clamp and Brake code output with overrides     
G28/G30 home select
Addressed - cross cutting operation with rotary axis turned on, post output matches backplot
Addressed - full arc moves on face with rotary axis turned on