|
Mpmaster
for Mastercam X2 |
 Pre-X
Mpmaster
Posts are provided 'as is' with no warranties, either
expressed or implied, that code generated through use of the posts is
safe or suitable for your machine tool. Please employ your own
established code verification procedures prior to running code on your
machine tool. Posts are generic and are intended for modification
to the machine tool requirements, operator preference, and established
internal standards. In short, use at your own risk.
Mpmaster - Master G-Code Post - Mastercam X
Based on CNC Software's master mill post - Mpfan - this post has additional
features.
eMastercam.com is operated by In-House Solutions Inc. - Authorized
Canadian Distributor. Please do not email post requests or support questions.
For post requests or support contact your
local reseller.
Download X (Full X Version with Machine Def / Control Def integration)
Click here to download Mpmaster for X
MR1/SP2 and above. It's our master configurable 4-Axis G-Code post. Rotary settings are
configured in the Machine Definition.
The Z2G file extension indicates a Zip2Go file created by
X. You can associate these files with WinZip. Ensure that you
preserve the directory structure when extracting. This file contains
the post, the Control Definition, and a generic Machine Definition.
Email feedback to our
Post Department.
Updated August 23, 2006
Download X (Older V9 style update to X)
Click here to download Mpmaster for X
SP1 Update 3 and above. It's our master configurable 4-Axis G-Code post. Rotary settings are
still configured in the post, not in the Machine Definition.
The Z2G file extension indicates a Zip2Go file created by
X. You can associate these files with WinZip. Ensure that you
preserve the directory structure when extracting. This file contains
the post, the Control Definition, and a generic Machine Definition.
Updated December 2, 2005
Special Features
X Coolant support
X comment support
Compatible with Machine Def changes for vertical/horizontal 4-Axis table
machine configurations
File
header tool table - configurable for Predator Virtual CNC and MetaCut View tool definition
and stock comments
Enhanced header entries
Single
rotary axis prefix setting
No
output of "A" for 3-Axis programs
Sets
WCS style in post, not in Misc Values
Min/Max
Z depth comments
Stock
left comments
Coolant
off with last Z move
Optional support for Acramatic 2100 style helical moves
Lock on
first WCS for use for 4-Axis rotary toolpaths
| 
