HTML Setup Sheets - V8
----------------------

This product launches Internet Explorer 4.0 or above as a browser.

1. Run the .exe file to install to root directory of Mastercam drive
   (e.g. C:\Mcam8).

2. Change Mill8.cfg (Screen-Configure-Files) to use HTML.set as your
   Setup sheet template.  You may have to exit Mastercam after
   changing your default Setup sheet template.

3. Under Screen-Configure-NC Settings, change the Setup Sheet style
   to Post (uses .SET file).

4. Open HTML.set in a text editor and modify the Web Browser and
   Directory strings as necessary:

   sexplorer  "C:\Program Files\Internet Explorer\iexplore.exe"
   sdirpath   "C|/Mcam8/Mill/Setup/"

5. Limitations
   NetHASP support for this product is not currently available.
   Directory and file names with spaces are not supported.
   Tested with IE 5.0 and above.
   Modify you post processor to include parameter information
   such as 'stock left' by modifying or added these numbered 
   questions at the end of your pst file:

1501. Insert parameter information in the ascii NCI? n
1502. Write operation information to binary file (.ops)? y

6. Customization is available at an hourly development rate.
   Email posts@eMastercam.com to request customization.

--
mailto:posts@eMastercam.com
http://www.eMastercam.com