HTML Setup Sheets - V9.1
------------------------

This product launches in the application associated with HTML files.

1. Run the .exe file to install to root directory of Mastercam drive
   (e.g. C:\Mcam9).  If a .zip file was provided, extract the file
   preserving the directory structure.

2. Under Screen-Configure-NC Settings, change the Setup Sheet style
   to Post (uses .SET file).

3. Change Mill9.cfg (Screen-Configure-Files) to use HTML.set as your
   Setup sheet template.

4. Open HTML.set in a text editor and modify the Explorer and
   Directory strings as necessary:

   #Launch executable string
   sexplorer  "C:\WINDOWS\explorer.exe"  # Browser location

   #Tool image locations
   sdirpath   "C:\Mcam9\Mill\Setup\"

5. Modify your post processor to output parameter information
   such as 'stock left' by editing or adding these numbered 
   questions at the end of your pst file:

1501. Insert parameter information in the ascii NCI? n
1502. Write operation information to binary file (.ops)? y

6. The product is now Open Source - no encryption of the files.
   If you modify the product, please provide the modified version
   back to posts@eMastercam.com for sharing with other users.

7. Customization is available at an hourly development rate.
   Email posts@eMastercam.com to request customization.

--
mailto:posts@eMastercam.com
http://www.eMastercam.com