JOB #:	98765	DATE:	07/31/03
PART #:	123454	REV. LEVEL:	A
CUSTOMER NAME:	Mastercam Users	DATE DUE:	07/30/2003
GEOMETRY FILE NAME:	C:\MCAM9\MILL\MC9\2DPOCKET.MC9		Hrs. : 0	Min. : 48
			Min. Z : -1.25	Max. Z : 1.
PROGRAM DESC:	Test Block
NC FILENAME:	2DPOCKET.NC

COMMENT	TOOLPATH TYPE	TL #	DIA - DESCRIPTION	FEED / PLUNGE	RPM	CUTS	RAPID	DEPTH	OA LEN
CUT POCKETS	POCKET	1	.75" - 3/4 FLAT END MILL - 4 Flute	24.44 / 12.22	2037	.2 Steps	1.	-1.	3.
FINISH OUTSIDE	CONTOUR	2	1." - 1" FLAT END MILL - 4 Flute	24.45 / 12.22	1528	.3 Steps	1.	-1.25	3.
CLEAN CORNERS	POCKET	3	.125" - 1/8 FLAT END MILL - 4 Flute	9.6 / 4.8	5000	1 @ -.75	1.	-.75	3.
CHAMFER	CONTOUR	4	.5" - 1/2 CHAMFER MILL - 4 Flute	24.45 / 12.22	3056	1 @ -.04	1.	-.04	3.
SPOT DRILL FOR 1/4 COUNTERBORE	DRILL/CBORE	5	.5" - 1/2 SPOTDRILL - 2 Flute	14.66 / 14.66	1833		1.	-.11	3.
SPOT DRILL 1/4 REAM HOLE	DRILL/CBORE	5	.5" - 1/2 SPOTDRILL - 2 Flute	14.66 / 14.66	1833		1.	-.11	3.
DRILL FOR 1/4 COUNTERBORE	PECK DRILL	7	.2813" - 17/32 DRILL - 2 Flute	31.29 / 31.29	3259		1.	-1.0845	3.
DRILL FOR 1/4 REAM HOLE	PECK DRILL	9	.2344" - 15/64 DRILL - 2 Flute	37.55 / 37.55	3911		1.	-1.0704	3.
REAM 1/4 HOLE	DRILL/CBORE	10	.25" - 1/4 REAMER - 2 Flute	46.94 / 46.94	3667		1.	-1.	3.
ENDMILL FOR 1/4 COUNTERBORE	DRILL/CBORE	11	.4375" - 7/16 FLAT END MILL - 4 Flute	33.52 / 33.52	2095		1.	-.25	3.