Mastercam X7 Mill Level 3 eCourse

Buy Now
149.00 995.00

This eCourse is designed to provide the resources you need to become proficient with 3D geometry creation and toolpaths. If you are new to Mastercam, it is highly recommended that you start with Mill Level 1 (book or eCourse) to build a firm foundation of 2D knowledge prior to exploring 3D.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 15 hours to complete.

Note: The free home learning edition/demo software for this course has expired. You can still watch the videos and read the eBook but you will not be able to follow along unless you own a licensed version of Mastercam.

Introduction
  1. Getting Started (Mastercam Workspace)
    2:45
Tutorial 1
  1. Tutorial 1 covers Surface Rough Pocket, Surface Finish Shallow & Surface Finish Contour toolpaths. 

  2. 1. Wireframe Geometry and Surfaces
    6:10
  3. 2. Fixture, Tool Parameters and Stock Setup
    1:11
  4. 3. Surface Rough Pocket
    2:59
  5. 4. Backplot and Verify
    2:11
  6. 5. Surface Finish Shallow
    3:15
  7. 6. Surface Finish Contour
    2:53
Tutorial 2
  1. Tutorial 2 covers Surface Rough Pocket, Surface Finish Parallel, & Surface Finish Contour toolpaths.

  2. 1. Wireframe Creation
    4:40
  3. 2. Surface Creation
    4:24
  4. 3. Fixture, Tool Settings and Stock Setup
    1:11
  5. 4. Surface Rough Pocket
    2:34
  6. 5. Surface Finish Parallel
    2:50
  7. 6. Surface Finish Pencil
    3:24
Tutorial 3
  1. Tutorial 3 covers Stock Model, Surface HS Rest Roughing & Radial & Surface Finish Blend toolpaths.

  2. 1. Wireframe Geometry
    2:30
  3. 2. Surface Creation
    3:54
  4. 3. Fixture, Tool Settings and Stock Setup
    1:46
  5. 4. High Speed Rest Roughing
    5:14
  6. 5. High Speed Radial
    2:29
  7. 6. Surface Finish Blend
    2:57
  8. 7. Transform Rotate
    2:52
Tutorial 4
  1. Tutorial 4 covers Surface HS OptiArea, Surface HS OptiRest, Surface HS Hybrid & Surface HS Scallop toolpaths.

  2. 1. Wireframe Creation
    5:21
  3. 2. Surface Creation
    8:30
  4. 3. Fixture, Tool Settings and Stock Setup
    1:15
  5. 4. High Speed Opti Area
    4:02
  6. 5. High Speed Optirest
    3:14
  7. 6. High Speed Hybrid
    5:19
  8. 7. High Speed Scallop
    4:14
Tutorial 5
  1. Tutorial 5 covers Surface HS Core Roughing, Scallop, Spiral & Waterline toolpaths.

  2. 1. Wireframe Creation and Revolved
    2:17
  3. 2. Pocket and Surfaces
    5:38
  4. 3. Finish Geometry
    6:20
  5. 4. Fixture, Tool Settings and Stock Setup
    1:06
  6. 5. Core Roughing
    3:40
  7. 6. Finish Scallop
    2:22
  8. 7. Transform Toolpath
    2:24
  9. 8. Spiral Toolpath
    4:23
  10. 9. Waterline Toolpath
    4:33
Tutorial 6
  1. Tutorial 6 covers Surface HS OptiCore, Horizontal, Waterline, Raster & Pencil toolpaths.

  2. 1. Surface Creation
    4:30
  3. 2. Fixture, Tool Settings and Stock Setup
    1:04
  4. 3. High Speed Core Rough
    4:14
  5. 4. High Speed Horizontal
    1:47
  6. 5. High Speed Waterline
    2:13
  7. 6. High Speed Raster
    2:41
  8. 7. Pencil Toolpath
    2:43
Tutorial 7
  1. Tutorial 7 covers Surface HS OptiArea, Rest Roughing, Surface Finish Scallop, Leftoever & Project toolpaths.

  2. 1. Surface Creation
    7:42
  3. 2. Fixture, Tool Settings and Stock Setup
    1:12
  4. 3. High Speed Opti Area
    2:28
  5. 4. High Speed Rest Rough
    3:16
  6. 5. Finish Scallop
    3:18
  7. 6. Finish Leftover
    3:34
  8. 7. Pocket and Project
    4:39

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us