Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam 2022 Mill Essentials eCourse - CEI

Buy Now
149.00 995.00

This course is designed to familiarize you with the Mastercam user interface (UI) and provide the resources you need to become proficient with 2D geometry creation and toolpaths. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, (perhaps an older version) it will get you up-to-date and enhance your abilities. 

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 13 hours to complete.

All videos in the eCourse are Closed Captioned

NOTICE: This course is identical to the standard Mastercam 2022 Mill Essentials eCourse. This version is simply for tracking sales through the CEI store.

Introduction
  1. Mastercam 2022 Workspace Video
    10:32
Tutorial 1
  1. Tutorial 1 covers Facing, Circle Mill, Drilling, and Contour Toolpaths

  2. 1. Intro
    1:02
  3. 2. Geometry Creation
    3:03
  4. 3. Machine Definition and Stock Setup
    1:31
  5. 4. Face
    3:15
  6. 5. Circle Mill the Large Hole
    4:07
  7. 6. Circle Mill the Inner Hole
    3:06
  8. 7. Spot Drill and Drill
    4:47
  9. 8. Chamfer the Large Hole
    3:40
  10. 9. Contour to Machine the Corners
    3:08
Tutorial 2
  1. Tutorial 2 covers Aligning Parts in a Vice, Multiple Setups, Slot Mill, Pocket, High Speed Dynamic Contour, High Speed Dynamic Mill, and Contour Toolpaths

  2. 1. Intro
    1:27
  3. 2. Geometry Creation
    8:51
  4. 3. Save the Vice as an Educational File
    1:30
  5. 4. Merge the Vice Geometry
    5:06
  6. 5. Machine Definition and Stock Setup
    0:41
  7. 6. Slot Mill
    5:06
  8. 7. Pocket
    3:45
  9. 8. Dynamic Contour to Finisht the Pockets
    3:26
  10. 9. Dynamic Mill the Outside Profile
    4:04
  11. 10. Contour to Finish the Outside Profile
    2:06
  12. 11. Stock Model
    0:53
  13. 12. Create Setup #2
    3:07
  14. 13. Create the Soft Jaw Vice
    3:42
  15. 14. Merge the Part Geometry
    5:47
  16. 15. Merge the Soft Jaw Vice
    2:16
  17. 16. Face the Part
    3:59
Tutorial 3
  1. Tutorial 3 covers 2D High Speed Dynamic Mill, Contour, 2D High Speed Area Mill, Transform-Rotate, and Drill toolpaths

  2. 1. Intro
    1:46
  3. 2. Wireframe Creation
    13:07
  4. 3. Solid Creation
    4:43
  5. 4. Machine Definition and Stock Setup
    0:41
  6. 5. Dynamic Mill the Steps
    4:14
  7. 6. Contour to Finsh the Walls
    2:49
  8. 7. Area Mill One Pocket
    3:41
  9. 8. Toolpath Transform Rotate
    2:15
  10. 9. Contour to Finish the Pocket Walls
    4:47
  11. 10 Spot Drill the Holes
    3:15
  12. 11. Drill the Holes
    2:27
  13. 12. Chamfer the Outside Diameter
    2:27
  14. 13. Chamfer the Pockets
    2:01
  15. 14. Create Setup #2
    1:38
  16. 15. Area Mill the Bottom Pocket
    2:36
  17. 16. Contour to Finish the Bottom Pocket
    2:58
Tutorial 4
  1. Tutorial 4 covers Multiple Setups, 2D High Speed Area Mill, 2D High Speed Area Mill with Remachining Enabled, Drill, Chamfer Drill, and Thread Mill toolpaths

  2. 1. Intro and Open Geometry
    2:06
  3. 2. Machine Definition and Stock Setup
    0:35
  4. 3. Area Mill One Pocket
    3:01
  5. 4. Area Mill the Lower Pocket
    3:07
  6. 5. Remachine the Pockets
    2:46
  7. 6. Drill the Top Holes
    2:37
  8. 7. Chamfer the Top Holes
    1:44
  9. 8. Tap the Top Holes
    2:12
  10. 9. Create Setup #2
    1:15
  11. 10. Chamfer Drill the Front Holes
    1:27
  12. 11. Drill and Tap the Front Holes
    3:56
  13. 12 Drill and Tap the Large Front Hole
    4:08
  14. 14. Create Setup #3
    1:07
  15. 15. Slot Mill the Left Side Slot
    3:04
Tutorial 5
  1. Tutorial 5 covers 2D High Speed Dynamic Mill, 2D High Speed Area Mill, 2D High Speed Blend Mill, and 2D High Speed Peel Mill

  2. 1. Intro
    1:08
  3. 2. Solid Creation
    5:12
  4. 3. Machine Definition and Stock Setup
    0:49
  5. 4. Dynamic Mill
    3:39
  6. 5. Area Mill
    3:21
  7. 6. Blend Mill
    3:37
  8. 7. Peel Mill
    4:40
  9. 8. Model Chamfer
    3:34
Tutorial 6
  1. Tutorial 6 covers 2D High Speed Dynamic Mill, Feature Based Drilling (FBM Drill), Pocket, and Contour Toolpaths

  2. 1. Intro
    1:14
  3. 2. Wireframe Creation
    5:58
  4. 3. Solid Creation
    3:17
  5. 4. Machine Definition and Stock Setup
    0:38
  6. 5. Dynamic Mill the Pockets
    3:16
  7. 6. FBM Drill
    6:41
  8. 7. Dynamic Mill the Profile
    2:28
  9. 8. Finish the Pockets
    2:17
  10. 9. Contour to Finish the Outside Profile
    2:30
  11. 10. Engrave the Letters
    2:34
Tutorial 7
  1. Tutorial 7 covers modifying vise geometry and aligning part geometry in the vise

  2. 1. Vice
    10:22
Exercises
  1. These exercises were recorded in Mastercam 2020. The instructions still apply to 2022.

  2. Analyze Chains
    5:39
  3. Analyze Commands
    5:17
  4. Break
    1:34
  5. Chaining
    5:38
  6. Create Arc Tangent
    1:44
  7. Create Arcs
    2:44
  8. Create Fillet
    1:34
  9. Create Line Tangent
    1:11
  10. Create Lines
    2:59
  11. Create Point Position
    2:03
  12. Create Rectangle
    2:12
  13. Managing Attributes and Levels
    2:39
  14. Transform - Mirror
    1:51
  15. Transform - Offset
    2:43
  16. Transform - Rotate
    1:32
  17. Transform - Translate
    1:59
  18. Trim
    2:29

Write a review


Guest


Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...