Mastercam 2022 Mill Advanced eCourse - CEI

Buy Now

149.00 995.00

This eCourse is designed to provide the resources you need to become proficient with 3D geometry creation and toolpaths. If you are new to Mastercam, it is highly recommended that you start with Mill Essentials (book or eCourse) to build a firm foundation of 2D knowledge prior to exploring 3D.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 15 hours to complete.

All videos in this eCourse are Closed Captions

NOTICE: This course is identical to the standard Mastercam 2022 Mill Advanced eCourse. This version is simply to track sales through the CEI store.

Introduction

Mastercam 2022 Workspace Video

10:32

Tutorial 1

Tutorial 1 covers Surface High Speed Area Roughing, Surface High Speed Horizontal, Surface High Speed Waterline toolpaths.
1. Intro

0:49
2. Solid Creation

4:07
3. Machine Definition and Stock Setup

0:37
4. Area Mill

6:13
5. Horizontal Area

3:17
6. Waterline

3:12

Tutorial 2

Tutorial 2 covers Stock Model, Surface High Speed Area Roughing with Rest Material, Surface High Speed Radial, Surface Finish Blend, and Tool Transform Rotate.
1. Intro

1:14
2. Geometry Creation

4:38
3. Machine Definition, Tool Settings, Stock Model

1:43
4. Rest Roughing

4:57
5. Stock Model After Roughing

0:37
6. Radial to Finish One Side

2:56
7. Blend

4:10
8. Toolpath Transform Rotate

2:03

Tutorial 3

Tutorial 3 covers Surface High Speed Dynamic Optirough, Surface High Speed Dynamic Optirough with Rest Material, Stock Model, and Surface High Speed Scallop.
1. Intro

1:30
2. Open Geometry and Prep Model

10:53
3. Machine Definition and Stock Setup

1:27
4. OptiRough

4:57
5. Stock Model After Roughing

1:05
6. OptiRough with Rest Material

6:39
7. Stock Model after OptiRest

0:39
8. Equal Scallop

6:32

Tutorial 4

Tutorial 4 covers Surface High Speed Area Roughing, Stock Model, Surface High Speed Scallop, Toolpath Transform Rotate, Surface High Speed Spiral, and Surface High Speed Waterline.
1. Intro

1:01
2. Geometry Creation Part 1

13:04
3. Geometry Creation Part 2

9:26
4. Machine Definition and Stock Setup

0:47
5. OptiRough

4:38
6. Stock Model after Roughing

0:29
7. Finish the Top Using Spiral

2:47
8. Finish the Walls Using Waterline

2:38
9. OptiRough One Pocket

2:59
10. Finish One Pocket Using Scallop

2:29
11. Toolpath Transform Rotate to Machine the Remaining Pockets

2:03

Tutorial 5

Tutorial 5 covers Solid Extrude Create Body, Extrude Boss, Extrude Cut, Draft to Face, Constant Radius Fillet, Shell, 2D High Speed Dynamic Mill, Surface High Speed Dynamic OptiRough, Surface High Speed Hybrid, Surface High Speed Pencil, 2D High Speed Dynamic Contour.
1. Intro

1:11
2. Solid Model Creation

13:40
3. Solid Core

6:51
4. Machine Definition and Stock Setup

0:42
5. Rough Using Dynamic Mill

1:60
6. OptiRough the Core

1:56
7. Finish the Core Using Hybrid

2:10
8. Pencil the Sharp Edges

2:09
9. Dynamic Contour the Profile

2:52

Tutorial 6

Tutorial 6 covers Surface commands such as Net, Loft, and Flat Boundary. Toolpaths such as 2D High Speed Dynamic OptiRough, Surface High Speed Scallop, Surface High Speed Pencil, Surface High Speed Project will be used.
1. Intro

0:60
2. Geometry Creation

5:13
3. Machine Definition and Stock Setup

0:41
4. Rough Using Dynamic Mill

3:24
5. Rough the Boss Using OptiRough

3:29
6. Scallop

1:44
7. Pencil

1:55
8. Project to Engrave the Letter

3:27

Exercises

Exercises

NOTE: These exercises were recorded for Mastercam 2020 but still apply to Mastercam 2021.
2 Surface Blend

0:52
3 Surface Blend

0:50
3 Fillet Blend

3:26
Create Curves

1:10
Cube

2:54
Draft and Flat Boundary Surfaces

1:10
Dynamic Planes

3:11
Fence Surface

1:36
Net Surface 1

1:55
Net Surface 2

0:31
Net Surface 3

0:31
Plane by Entity

1:31
Plane by Normal

1:34
Primitives

2:18
Revolved Surface

0:46
Surface Fillet

2:19
Sweep Surface

0:41
Trim to Curves

1:58

Write a review

Your name
Security Check
Rating Required

1 2 3 4 5
Comment Required
Click here

× Pasted as rich text.   Paste as plain text instead

Only 75 emoji are allowed.

× Your link has been automatically embedded.   Display as a link instead

× Your previous content has been restored.   Clear editor

× You cannot paste images directly. Upload or insert images from URL.

Insert image from URL
×

Desktop

Tablet

Phone

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.