Mastercam X7 Intro to Multiaxis eCourse

Buy Now

149.00 995.00

The Mastercam X7 Multiaxis eCourse is intended for the advanced Mastercam user looking to learn Mastercam Multiaxis programming. A firm grasp on both 2D and 3D machining is required and can be attained by completing the Mill Level 1 and Mill Level 3 Training Tutorials or eCourses.

The Intro to Multiaxis eCourse covers the different applications that are available by configuring the Rotary Axis Control page including: Rotary axis positioning and Axis substitution. It also covers the Multiaxis Classic family toolpaths: Rotary, Curve, Swarf, Flow, and Msurf. A special tutorial is dedicated to teaching how to drill and circle mill holes using Multiaxis toolpaths. Specific parameters such as Cut patterns, Tool Axis Control, Limits, Collision Control, Linking and more are described in detail.

We also describe how to verify the toolpaths using the new Machine Simulation module that combines toolpath backplot mode and material removal mode with collision detection.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 10 hours to complete.

Note: The free home learning edition/demo software for this course has expired. You can still watch the videos and read the eBook but you will not be able to follow along unless you own a licensed version of Mastercam.

Introduction

Getting Started

3:17

Tutorial 1

Tutorial 1 covers Contour With Axis Substitution.
1. Geometry Creation

1:42
2. Setup the Stock and Machine Definition

2:03
3. Machine the Cylindrical Helix Using Axis Sub

4:39
4. Create the Geometry for the Conical Helix

0:46
5. Machine the Conical Helix

2:04

Tutorial 2

Tutorial 2 covers Drilling With Axis Substitution and Rotary Axis Positioning & Transform Rotate toolapths.
1. Geometry creation, Machine and Stock Setup

0:55
2. Drilling Toolpath

1:56
3. Rotary Toolpath

1:34
4.Contour Toolpath

2:22
5. Machine the Top Slot

1:26
6. Transform Rotate

1:45

Tutorial 3

Tutorial 3 covers Rolldie C-Hook.
1. Geometry Creation

4:30
2. Select the Machine and Stock Setup

1:11
3. Contour Toolpath

3:34
4. Rolldie C-Hook

5:41

Tutorial 4

Tutorial 4 covers Contour Indexing Using Planes.
1. Geometry Creation, Machine Setup and Stock Setup

0:56
2. Contour Toolpath

3:20
3. Define a New Tool Plane

1:33
4. Transform Rotate

1:21
5. Machine the Top Slot

1:39
6. Machine the Bigger Slot

2:02

Tutorial 5

Tutorial 5 covers Rotary 4-Axis.
1. Geometry Creation, Set up the Machine and Stock setup

0:60
2. Rotary 4 Axis with Rotary Cut

6:18
3. Rotary 4 Axis with Axial Cut

8:29

Tutorial 6

Tutorial 6 covers Curve 5-Axis.
1. Geometry Creation, Machine Setup and Stock Setup

1:13
2. Curve, Oriented to a Point

4:19
3. Curve, Oriented from a Point

1:47
4. Curve, Oriented from a Plane

2:04
5. Curve, Oriented towards a Chain

1:46
6. Curve, Oriented to Lines

6:23

Tutorial 7

Tutorial 7 covers Swarf 5-Axis.
1. Geometry Creation

1:30
2. Swarf Toolpath With Walls Defined From The Chains

5:05
3. Swarf Toolpath With Walls Defined From Surfaces

1:43

Tutorial 8

Tutorial 8 covers Drill & Circle Mill 5-Axis.
1. Geometry Creation, Machine Setup

0:58
2. Multiaxis - Drill Toolpath With Entity

3:16
3. Circle Mill 5 Axis

2:45

Tutorial 9

Tutorial 9 covers Flow 5-Axis.
1. Geometry Creation

0:38
2. Flow, Parallel to Lines

4:11
3. Machine Simulation

2:09
4. Flow, Oriented to a Point

4:19
5. Transform Rotate

1:04

Tutorial 10

Tutorial 10 covers Multisurface 5-Axis.
1. Geometry Creation

0:53
2. Rough the Cavity

5:35
3. Finish the Part

4:34

Write a review

Your name
Rating Required

1 2 3 4 5
Comment Required
Click here

× Pasted as rich text.   Paste as plain text instead

Only 75 emoji are allowed.

× Your link has been automatically embedded.   Display as a link instead

× Your previous content has been restored.   Clear editor

× You cannot paste images directly. Upload or insert images from URL.

Insert image from URL
×

Desktop

Tablet

Phone

Thuc Tran 0

June 23, 2021

Excellent !

These videos were Useful for Mastercamers ( Disciples Of Mastercam softwares ) and
These will form the concepts and Ideas in the mind before executing each lesson

after I washed all these videos , I have one suggestion : Mastercam-Team should make videos and ebooks of designing All models used in all these lessons

and then keep them separately as mastercamX7 designing model course , It will be perfect courses for MastercamX7

Share this review

Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.