Mastercam X9 Lathe eCourse

Buy Now
149.00 995.00

This eCourse is designed to familiarize you with the Mastercam user interface and provide the resources you need to become proficient with geometry creation and toolpaths for lathe applications. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, it will get you up-to-date and enhance your abilities.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 7 hours to complete.

Note: The free home learning edition/demo software for this course has expired. You can still watch the videos and read the eBook but you will not be able to follow along unless you own a licensed version of Mastercam.

Introduction
  1. Getting Started
    8:48
Tutorial 1
  1. Tutorial 1 covers the Face, Roughing and Finish toolpaths.

  2. 1. Drawing and CAD Creation
    5:12
  3. 2. Setup Sheet, Machine Definition, and Stock Setup
    3:51
  4. 3. Face the Part
    3:08
  5. 4. Rough the Part
    4:14
  6. 5. Finish the Part
    3:47
Tutorial 2
  1. Tutorial 2 covers Groove using Multiple Chains & Drilling toolpaths.

  2. 1. Drawing and CAD Creation
    6:55
  3. 2. Setup Sheet, Machine Definition, and Stock Setup
    2:40
  4. 3. Facing the Part
    1:52
  5. 4. Roughing the OD
    2:33
  6. 5. Finish the OD
    1:40
  7. 6. Groove the Part
    3:14
  8. 7. Drill the Holes
    2:57
Tutorial 3
  1. Tutorial 3 covers Canned Rough & Finish toolpaths, Groove at an angle, as well as Custom Tool & Cutoff toolpaths. 

  2. 1. Drawing and CAD Creation
    8:21
  3. 2. Setup Sheet, Machine Definition, and Stock Setup
    2:43
  4. 3. Face the Part
    1:52
  5. 4. Canned Rough
    3:09
  6. 5. Finish Canned
    1:30
  7. 6. Groove
    3:36
  8. 7. Angled Groove
    3:39
  9. 8. Groove Finish
    4:35
  10. 9. Cutoff
    2:36
Tutorial 4
  1. Tutorial 4 covers ID Rough, Finish & Groove toolpaths. 

  2. 1. Drawing and CAD Creation
    4:21
  3. 2. Setup Sheet, Machine Definition, and Stock Setup
    3:03
  4. 3. Face and Rough
    2:37
  5. 4. Finish the OD
    1:39
  6. 5. Spot and Drill
    3:27
  7. 6. Rough the ID
    2:25
  8. 7. Finish the ID
    2:46
  9. 8. Groove the ID
    3:14
  10. 9. Cutoff
    2:45
Tutorial 5
  1. Tutorial 5 covers the Thread toolpath and Stock Flip. 

  2. 1. Drawing and CAD Creation
    9:12
  3. 2. Setup Sheet, Machine Definition, and Stock Setup
    2:44
  4. 3. Face the Part
    0:45
  5. 4. Rough the OD
    2:10
  6. 5. Finish the OD
    1:48
  7. 6. Machine the Groove
    2:11
  8. 7. Thread
    2:59
  9. 8. Center Drill
    1:11
  10. 9. Drill the Center Point
    1:25
  11. 10. Flip the Part
    2:54
  12. 11. Rough and the Finish the Flipped OD
    2:31
Tutorial 6
  1. Tutorial 6 includes Stock Advance and Lathe Tailstock operations. 

  2. 1. Drawing and CAD Creation
    10:11
  3. 2. Setup Sheet, Machine Definition, and Stock Setup
    2:43
  4. 3. Face the Part
    0:40
  5. 4. Rough and Finish the OD
    3:45
  6. 5. Groove the Relief
    2:21
  7. 6. Machine the Thread
    1:53
  8. 7. Machine the Other Thread
    1:41
  9. 8. Center Drill the Hole
    1:20
Tutorial 7
  1. Tutorial 7 covers machining a part in a Vertical Turret Lathe (VTL machine). We will bring in a part from SolidWorks and manipulate the geometry appropriately within Mastercam. 

  2. 1. Import the Geometry
    3:51
  3. 2. Setup Sheet, Machine Definition, Stock Setup
    4:06
  4. 3. Face the Part
    0:50
  5. 4. Rough the OD
    1:56
  6. 5. Finish the OD
    1:10
  7. 6. Spot Drill
    2:05
  8. 7. Drill the Hole
    2:60
  9. 8. Rough and Finish the ID
    2:45
  10. 9. Groove
    4:36
Exercises
  1. Exercises

  2. Analyze Chains
    4:57
  3. Analyze
    4:29
  4. Attributes
    3:08
  5. Break and Join
    2:26
  6. Chain
    6:38
  7. Chamfer
    3:19
  8. Change Attributes
    3:10
  9. Create Arc Tangent
    2:22
  10. Create Arc
    3:03
  11. Create Line
    3:47
  12. Create Point Position
    3:01
  13. Create Rectangle
    3:16
  14. Fillet
    3:15
  15. Levels
    3:51
  16. Mirror
    2:18
  17. Offset
    2:30
  18. Translate
    2:27
  19. Trim
    3:26

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us