Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam 2017 Mill Essentials eCourse

Buy Now
149.00 995.00

This course is designed to familiarize you with the Mastercam user interface (UI) and provide the resources you need to become proficient with 2D geometry creation and toolpaths. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, (perhaps an older version) it will get you up-to-date and enhance your abilities. 

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 13 hours to complete.

Introduction
  1. Workspace 2017
    5:22
Tutorial 1

  1. Tutorial 1 covers Facing, Circle Mill, Contour, Spot Drill, Drill, and Chamfer Toolpaths.

  2. 1. Geometry Creation
    2:45
  3. 2. Setup Sheet, Machine Definition, and Stock Setup
    1:48
  4. 3. Face the Part
    3:39
  5. 4. Circle Mill
    3:14
  6. 5. Circle Mill the Smaller Hole
    2:36
  7. 6. Spot Drill the Holes
    3:09
  8. 7. Drill the Holes
    1:57
  9. 8. Chamfer Toolpath
    4:38
  10. 9. Machine the Outside Chamfers
    5:02
Tutorial 2

  1. Tutorial 2 covers 2 Setups, Slot Mill, 2D HS Dynamic Mill & 2D HS Dynamic Contour Toolpaths.

  2. 1. CAD Drawing
    0:06
  3. 2. Geometry Creation
    6:52
  4. 3. Setup Sheet, Machine Definition, Stock Setup
    1:19
  5. 4. Slot Mill
    3:08
  6. 5. Counter Toolpath on Outside Profile
    4:36
  7. 6. Finish the Outside Profile
    2:58
  8. 7. Dynamic Contour
    4:31
  9. 8. Flip the Part, Facing Operation, and Post
    5:35
Tutorial 3

  1. Tutorial 3 covers 2D HS Core, 2D HS Dynamic Core, Pocket, and Pocket Remachine Toolpaths

  2. 1. CAD Drawing
    0:06
  3. 2. Geometry Creation
    7:45
  4. 3. Setup Sheet, Machine Definition, Stock Setup
    1:27
  5. 4. 2D HS Area Mill
    4:45
  6. 5. 2D HS Dynamic Mill
    3:41
  7. 6. Pocket the Inner Elipse
    3:50
  8. 7. Remachine and Post
    4:08
Tutorial 4

  1. Tutorial 4 covers 2D HS Mill, 2D HS Dynamic Mill,  and Transform Toolpaths.

  2. 1. CAD Drawing
    0:06
  3. 2. Geometry Creation, Part 1
    6:09
  4. 3. Geometry Creation, Part 2
    6:27
  5. 4. Setup Sheet, Machine Definition, Stock Setup
    0:55
  6. 5. Area Mill
    3:25
  7. 6. Dynamic Mill the Large Holes
    4:33
  8. 7. Machine the Smaller Pocket and Rotate the Toolpath
    4:04
  9. 8. Finish the Pocket Walls
    4:26
  10. 9. Spot Drill
    2:56
  11. 10. Drill the Holes
    2:31
  12. 11. Circle Mill the Middle Hole
    2:23
  13. 12. Chamfer the Part
    2:54
  14. 13. Second Setup Sheet
    0:08
  15. 14. Flip the Part and Mill the Bottom Stock
    3:57
  16. 15. Finish the Bottom Pocket Walls
    4:25
Tutorial 5

  1. Tutorial 5 covers Multiple Setups, 2D HS Area Mill, 2D HS Area (Rest Material) Toolpaths.

  2. 1. CAD Drawing
    0:07
  3. 2. Import the SolidWorks Files
    1:24
  4. 3. Setup Sheet, Machine Definition, Stock Setup
    1:01
  5. 4. 2D HS Area Mill
    2:55
  6. 5. 2D HS Area Mill, Bottom Pocket
    2:49
  7. 6. Area Mill to Remachine the Pockets
    2:42
  8. 7. Spot Drill the Holes
    2:33
  9. 8. Drill the Through Holes
    2:12
  10. 9. Tap the Four Holes
    1:53
  11. 10. Second Setup Sheet
    0:17
  12. 11. Flip the Part, Spot Drill on the Front Plane
    4:36
  13. 12. Drill the Two Holes on the Front Plane
    2:20
  14. 13. Tap the Two Holes on the Front Plane
    2:26
  15. 14. Drill the Bigger Hole on the Front Plane
    1:36
  16. 15. Counterbore the Bigger Hole
    2:14
  17. 16. Third Setup Sheet
    0:07
  18. 17. Slot Mill
    4:38
Tutorial 6

  1. Tutorial 6 covers 2D HS Dynamic, 2D HS Area, 2D HS Blend, and 2D HS Peel Mill Toolpaths.

  2. 1. CAD Drawing
    0:06
  3. 2. Geometry Creation
    6:23
  4. 3. Setup Sheet, Machine Definition, Stock Setup
    0:53
  5. 4. 2D HS Dynamic Mill
    4:22
  6. 5. 2D HS Area Mill
    2:46
  7. 6. 2D HS Blend Mill
    3:07
  8. 7. 2D HS Peel Mill
    2:44
  9. 8. 2D HS Peel Mill the Other Side
    2:28
Tutorial 7

  1. Tutorial 7 covers 2D HS Area, Feature Based Drilling Toolpath (FBM) & 2D HS Dynamic Toolpaths.

  2. 1. CAD Drawing
    0:07
  3. 2. Geometry Creation
    8:59
  4. 3. Setup Sheet, Machine Definition, Stock Setup
    1:03
  5. 4. 2D Dynamic Mill
    2:46
  6. 5. FBM Drill
    2:24
    Preview
  7. 6. Machine the Outside Using Dynamic Mill
    3:19
  8. 7. Finish the Pockets Using Pocket Toolpath
    3:07
  9. 8. Contour to Finish the Part
    3:25
Exercises

  1. Exercises

  2. Analyze Chains
    2:54
  3. Analyze
    2:42
  4. Arc Polar
    1:44
  5. Attributes
    3:20
  6. Break
    1:19
  7. Chain
    5:01
  8. Change Attributes
    1:38
  9. Create Arc Tanget
    1:17
  10. Create Arc
    2:06
  11. Create Line Tangent
    0:58
  12. Create Lines
    2:14
  13. Create Point Position
    1:49
  14. Create Rectangle
    1:56
  15. Cube
    3:30
  16. Extrude
    1:39
  17. Fillet
    1:30
  18. Join
    0:56
  19. Levels
    3:05
  20. Mirror
    1:35
  21. Offset
    2:45
  22. Polygon
    1:24
  23. Rotate
    1:32
  24. Solid Chamfer
    1:21
  25. Translate
    1:43
  26. Trim
    1:26

Write a review


Guest


Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...