Mastercam 2017 Lathe eCourse

Buy Now
149.00 995.00

This eCourse is designed to familiarize you with the Mastercam user interface and provide the resources you need to become proficient with geometry creation and toolpaths for lathe applications. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, it will get you up-to-date and enhance your abilities.

 

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 7 hours to complete.

Introduction
  1. Workspace 2017
    5:23
Tutorial 1
  1. Tutorial 1 covers the Face, Roughing and Finish toolpaths.

  2. 1. CAD Drawing
    0:06
  3. 2. Geometry Creation
    6:04
  4. 3. Setup Sheet, Machine Definition, Stock Setup
    2:51
  5. 4. Face the Part
    3:11
  6. 5. Rough the OD
    4:09
  7. 6. Finish the OD
    3:32
Tutorial 2
  1. Tutorial 2 covers Groove using Multiple Chains & Drilling toolpaths.

  2. 1. CAD Drawing
    0:06
  3. 2. Geometry Creation
    7:09
  4. 3. Setup Sheet, Machine Definition, Stock Setup
    2:22
  5. 4. Face the Part
    1:44
  6. 5. Rough the OD
    2:44
  7. 6. Finish the OD
    1:44
  8. 7. Groove Toolpath
    2:22
  9. 8. Spot Drill the Center Hole
    1:31
  10. 9. Drill the Center Hole
    2:02
Tutorial 3
  1. Tutorial 3 covers Canned Rough & Finish toolpaths, Groove at an angle, as well as Custom Tool & Cutoff toolpaths. 

  2. 1. CAD Drawing
    0:07
  3. 2. Geometry Creation
    8:29
  4. 3. Setup Sheet, Machine Definition, Stock Setup
    2:08
  5. 4. Face the Part
    1:48
  6. 5. Canned Rough Toolpath
    2:60
  7. 6. Canned Finish Toolpath
    1:35
  8. 7. Groove Toolpath
    2:40
  9. 8. Angled Grooves
    2:47
  10. 9. Finish Groove with Custom Tool
    3:47
  11. 10. Cutoff Toolpath
    2:35
Tutorial 4
  1. Tutorial 4 covers ID Rough, Finish & Groove toolpaths. 

  2. 1. CAD Drawing
    0:07
  3. 2. Geometry Creation
    3:46
  4. 3. Setup Sheet, Machine Definition, Stock Setup
    2:15
  5. 4. Face the Part
    1:26
  6. 5. Rough the OD
    1:36
  7. 6. Finish the OD
    1:12
  8. 7. Center Drill
    1:31
  9. 8. Drill the Part
    1:27
  10. 9. Rough the ID
    1:56
  11. 10. Finish the ID
    1:53
  12. 11. Finish the Grooves
    3:22
  13. 12. Cutoff the Part
    2:02
Tutorial 5
  1. Tutorial 5 covers the Thread toolpath and Stock Flip. 

  2. 1. CAD Drawing
    0:06
  3. 2. Geometry Creation, Part 1
    4:05
  4. 3. Geometry Creation, Part 2
    3:16
  5. 4. Setup Sheet, Machine Definition, Stock Setup
    2:22
  6. 5. Face the Part
    0:47
  7. 6. Rough the OD
    1:41
  8. 7. Finish the OD
    1:12
  9. 8. Machine the Groove
    1:47
  10. 9. Thread the Groove
    1:56
  11. 10. Center Drill
    1:10
  12. 11. Drill
    1:13
  13. 12. Flip the Part
    1:02
  14. 13. Face the Backside
    1:03
  15. 14. Rough the OD of the Flipped Part
    0:60
  16. 15. Finish the OD
    0:37
  17. 16. Groove the Flipped Part
    1:34
  18. 17. Machine the Flipped Thread
    1:43
  19. 18. Center Drill the Flipped Part
    1:18
  20. 19. Drill the Center
    2:06
Tutorial 6
  1. Tutorial 6 includes Stock Advance and Lathe Tailstock operations. 

  2. 1. CAD Drawing
    0:07
  3. 2. Geometry Creation
    8:34
  4. 3. Setup Sheet, Machine Definition, Stock Setup
    2:04
  5. 4. Face the Part
    1:06
  6. 5. Rough the OD, Part 1
    1:26
  7. 6. Rough the OD, Part 2
    1:24
  8. 7. Machine the Grooves
    1:56
  9. 8. Machine the Thread
    1:44
  10. 9. Machine the Other Thread
    1:41
  11. 10. Center Drill
    1:08
  12. 11. Advance Stock and Tailstock
    1:05
  13. 12. Machine the Grooves
    3:16
  14. 13. Cutoff
    1:09
Tutorial 7
  1. Tutorial 7 covers machining a part in a Vertical Turret Lathe (VTL machine). We will bring in a part from SolidWorks and manipulate the geometry appropriately within Mastercam. 

  2. 1. Import Geometry
    2:42
  3. 2. Setup Sheet, Machine Definition, Stock Setup
    3:22
  4. 3. Face the Part
    1:18
  5. 4. Rough the OD
    2:11
  6. 5. Finish the OD
    1:37
  7. 6. Spot Drill
    1:25
  8. 7. Drill a Hole
    2:60
  9. 8. Rough and Finish the ID
    3:28
  10. 9. Machine the ID Grooves
    4:22
  11. 10. Thread the OD
    3:16
Exercises
  1. Exercises

  2. Analyze Chains
    2:54
  3. Analyze
    2:24
  4. Attributes
    3:20
  5. Break
    1:19
  6. Chain
    4:32
  7. Chamfer
    1:52
  8. Change Attributes
    1:30
  9. Create Arc Tangent
    1:17
  10. Create Arc
    2:06
  11. Create Lines
    2:14
  12. Create Point Position
    1:49
  13. Create Rectangle
    1:56
  14. Fillet
    1:39
  15. Join
    0:56
  16. Levels
    3:05
  17. Mirror
    1:32
  18. Offset
    1:30
  19. Translate
    1:34
  20. Trim
    1:27

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us