Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam 2018 Lathe eCourse

Buy Now
149.00 995.00

This eCourse is designed to familiarize you with the Mastercam user interface and provide the resources you need to become proficient with geometry creation and toolpaths for lathe applications. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, it will get you up-to-date and enhance your abilities.

 

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 7 hours to complete.

Introduction
  1. Mastercam 2018 Lathe Getting Started
    8:10
Tutorial 1
  1. Tutorial 1 covers the Face, Roughing and Finish toolpaths.

  2. 1. Geometry Creation
    9:21
  3. 2. Machine Definition and Stock Setup
    2:08
  4. 3. Facing
    3:32
  5. 4. Roughing
    4:41
  6. 5. Finishing
    2:37
  7. 6. Post
    1:53
Tutorial 2
  1. Tutorial 2 covers Groove using Multiple Chains & Drilling toolpaths.

  2. 1. Geometry Creation
    8:54
  3. 2. Machine Definition and Stock Setup
    1:49
  4. 3. Facing
    0:45
  5. 4. Roughing
    2:19
  6. 5. Finishing
    1:35
  7. 6. Groove Using Multiple Chains
    3:53
  8. 7. Center Drill and Drill
    2:35
  9. 8. Post
    1:01
Tutorial 3
  1. Tutorial 3 covers Canned Rough & Finish toolpaths, Groove at an angle, as well as Custom Tool & Cutoff toolpaths. 

  2. 1. Import the Geometry
    6:58
  3. 2. Machine Definition and Stock Setup
    2:41
  4. 3. Facing
    1:03
  5. 4. Center Drill
    1:52
  6. 5. Drill
    1:48
  7. 6. Canned Rough
    4:39
  8. 7. Canned Finish
    1:55
  9. 8. Rough the OD
    8:09
  10. 9. Finish the OD
    3:22
  11. 10. Machine the Grooves
    9:13
  12. 11. Machine the Angled Grooves
    6:04
  13. 12. Cutoff
    2:29
  14. 13. Post
    1:22
Tutorial 4
  1. Tutorial 4 covers ID Rough, Finish & Groove toolpaths. 

  2. 1. Geometry Creation
    5:55
  3. 2. Machine Definition and Stock Setup
    1:60
  4. 3. Facing
    1:01
  5. 4. Rough the OD
    2:47
  6. 5. Finish the OD
    1:19
  7. 6. Center Drill
    1:29
  8. 7. Drill
    1:38
  9. 8. Rough the ID
    2:14
  10. 9. Finish the ID
    3:55
  11. 10. Cutoff
    2:03
  12. 11. Post
    0:54
Tutorial 5
  1. Tutorial 5 covers the Thread toolpath and Stock Flip. 

  2. 1. Geometry Creation
    10:46
  3. 2. Machine Definition, Stock Setup
    1:44
  4. 3. Facing
    0:59
  5. 4. Rough the OD
    3:02
  6. 5. Finish the OD
    1:49
  7. 6. Relief Groove
    2:55
  8. 7. Thread
    5:13
  9. 8. Center Drill and Drill
    2:17
  10. 9. Stock Flip
    2:08
  11. 10. Facing #2
    1:04
  12. 11. Rough the OD #2
    1:36
  13. 12. Finish the OD #2
    0:57
  14. 13. Grooves
    4:33
  15. 14. 5/8" 18 UNF Thread
    2:38
  16. 15. Center Drill and Drill #2
    2:41
  17. 16. Post
    1:19
Tutorial 6
  1. Tutorial 6 includes Stock Advance and Lathe Tailstock operations. 

  2. 1. Geometry Creation
    12:41
  3. 2. Machine Definition and Stock Setup
    2:01
  4. 3. Facing
    1:01
  5. 4. Rough the OD
    2:34
  6. 5. Finish the OD with Downcutting
    3:25
  7. 6. Relief Grooves
    4:05
  8. 7. Machine the 1/2" 13 UNC Thread
    2:50
  9. 8. Machine the 1" 12 UNF Thread
    2:16
  10. 9. Center Drill
    1:47
  11. 10. Advance the Stock and Tailstock
    1:40
  12. 11. Machine the Grooves
    5:14
  13. 12. Cutoff
    1:48
  14. 13. Post
    0:60
Tutorial 7
  1. Tutorial 7 covers machining a part in a Vertical Turret Lathe (VTL machine). We will bring in a part from SolidWorks and manipulate the geometry appropriately within Mastercam. 

  2. 1. Import Geometry
    5:05
  3. 2. Machine Definition and Stock Setup
    6:38
  4. 3. Facing
    1:59
  5. 4. Rough the OD
    2:50
  6. 5. Finish the OD
    1:26
  7. 6. Center Drill and Drill
    4:53
  8. 7. Rough and Semifinish the ID
    3:15
  9. 8. Machine the ID Grooves
    4:09
  10. 9. OD Thread
    2:34
  11. 10. Post
    0:42
Create and Edit Lathe Tools
  1. Videos explaining how to create a new Lathe tool and save it to the Tool Library, and how to modify an existing Lathe Tool.

  2. 1. Create a Lathe Tool
    4:09
  3. 2. Modify a Lathe Tool
    3:15
Exercises
  1. Exercises

  2. Analyze Commands
    5:38
  3. Analyzing Chains
    8:09
  4. Break Commands
    2:13
  5. Chaining Options
    4:13
  6. Create Arcs
    2:28
  7. Create Chamfer
    3:55
  8. Create Lines
    4:40
  9. Create Point Position
    3:36
  10. Create Rectangles
    3:17
  11. Join Entities
    2:32
  12. Levels
    6:02
  13. Managing Attributes and Levels
    5:49
  14. Tangent Arcs
    2:33
  15. Transform Mirror
    2:42
  16. Transform Offset
    3:17
  17. Translate Command
    2:39
  18. Trim Commands
    3:56

Write a review


Guest


Luis Eduardo Aleman Reyna

  • 5
   4 of 6 members found this review helpful 4 / 6 members

is so good 

Share this review


Link to review
hien tran_49515

  • 1
   1 of 2 members found this review helpful 1 / 2 members

how can i skip to what video i want to watch? like i dont finish video 2 but i want to watch video 7. thank you

Share this review


Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...