Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam 2018 Mill Essentials eCourse

Buy Now
149.00 995.00

This course is designed to familiarize you with the Mastercam user interface (UI) and provide the resources you need to become proficient with 2D geometry creation and toolpaths. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, (perhaps an older version) it will get you up-to-date and enhance your abilities. 

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 13 hours to complete.

All videos in the eCourse are Closed Captioned

Introduction
  1. Getting Started
    10:14
Tutorial 1

  1. Tutorial 1 covers Facing, Circle Mill, Contour, Spot Drill, Drill, and Chamfer Toolpaths.

  2. Geometry Creation
    4:39
  3. Machine Definition and Stock Setup
    2:53
  4. Facing Toolpath
    4:13
  5. Circle Mill the Large Hole
    5:41
  6. Circle Mill the Inner Hole
    3:18
  7. Spot Drill and Drill
    5:32
  8. Chamfer the Large Hole
    3:37
  9. Chamfer the Corners
    2:44
  10. Post
    1:34
Tutorial 2

  1. Tutorial 2 covers 2 Setups, Slot Mill, 2D High Speed Dynamic Mill & 2D High Speed Contour Toolpaths.

  2. Geometry Creation
    9:56
  3. Machine Definition and Stock Setup
    1:13
  4. Slot Mill
    4:60
  5. Rough with 2D High Speed Dynamic Mill
    6:29
  6. Finish the OD with Contour
    2:08
  7. 2D High Speed Dynamic Mill to Machine the Polygon
    4:15
  8. Rename the Groups and Change the WCS
    3:38
  9. Face the Bottom
    1:36
  10. Post
    1:15
Tutorial 3

  1. Tutorial 3 covers 2D HS Core, 2D HS Dynamic Core, Pocket, and Pocket Remachine Toolpaths

  2. Geometry Creation
    11:19
  3. Machine Definition and Stock Setup
    1:09
  4. 2D High Speed Area Mill
    7:49
  5. 2D High Speed Dynamic Mill
    4:57
  6. Pocket
    4:19
  7. Pocket Remachining
    3:02
  8. Post
    0:46
Tutorial 4

  1. Tutorial 4 covers 2D HS Mill, 2D HS Dynamic Mill,  and Transform Toolpaths.

  2. Geometry Creation
    19:55
  3. Machine Definition and Stock Setup
    1:03
  4. 2D High Speed Dynamic Mill
    5:09
  5. Contour Toolpath to Finish the Walls
    2:47
  6. Area Mill a Pocket
    5:28
  7. Transform Rotate the Previous Toolpath
    2:15
  8. Finish the Pocket Walls
    2:54
  9. Spot Drill the Holes
    2:17
  10. Drill the Holes
    2:25
  11. Chamfer the Outside Diameter
    2:22
  12. Chamfer the Pockets
    2:31
  13. Change the WCS
    1:51
  14. Machine the Bottom
    3:10
  15. Finish the Bottom
    1:60
  16. Post
    0:51
Tutorial 5

  1. Tutorial 5 covers Multiple Setups, 2D HS Area Mill, 2D HS Area (Rest Material) Toolpaths.

  2. Import the Geometry
    3:26
  3. Machine Definition and Stock Setup
    0:49
  4. 2D High Speed Area Mill the Pocket
    3:25
  5. 2D High Speed Area Mill the Lower Pocket
    3:36
  6. Remachine the Pocket
    2:40
  7. Spot Drill and Drill
    3:51
  8. Tap the Holes
    1:58
  9. Setup #2
    1:21
  10. Spot Drill the Front Holes
    2:25
  11. Drill the 3/8" Holes
    2:02
  12. Tap the 3/8" Holes
    1:45
  13. Drill the 1/2" Hole
    1:42
  14. Counterbore the 1/2" Hole
    1:51
  15. Setup #3
    1:17
  16. Slot Mill
    2:22
  17. Post
    1:03
Tutorial 6

  1. Tutorial 6 covers 2D HS Dynamic, 2D HS Area, 2D HS Blend, and 2D HS Peel Mill Toolpaths.

  2. Geometry Creation
    9:15
  3. Machine Definition and Stock Setup
    0:45
  4. 2D High Speed Dynamic Mill
    4:28
  5. 2D High Speed Area Mill
    2:28
  6. 2D High Speed Blend Mill
    3:26
  7. Peel Mill the First Slot
    2:32
  8. Peel Mill the Second Slot
    1:45
  9. Post
    0:51
Tutorial 7

  1. Tutorial 7 covers 2D HS Area, Feature Based Drilling Toolpath (FBM) & 2D HS Dynamic Toolpaths.

  2. 1. Geometry Creation
    11:21
  3. 2. Machine Definition and Stock Setup
    0:58
  4. 3. 2D High Speed Dynamic Mill
    3:23
  5. 4. FBM Drill
    6:44
  6. 5. 2D Dynamic Mill the Profile
    3:34
  7. 6. Finish the Pockets
    2:21
  8. 7. Finish the Profile
    2:03
  9. 8. Post
    0:39
Exercises

  1. Exercises

  2. Analyze Chains
    8:07
  3. Analyze Commands
    4:56
  4. Arc Polar
    2:34
  5. Arc Tangent
    2:33
  6. Break Commands
    2:13
  7. Chain
    2:18
  8. Create Arcs
    2:28
  9. Line Tangent
    1:49
  10. Create Lines
    4:40
  11. Create Point Position
    3:35
  12. Create Rectangles
    3:15
  13. Extrude Solid
    2:25
  14. Fillet
    2:04
  15. Join Entities
    2:32
  16. Levels
    6:00
  17. Managing Attributes and Levels
    5:49
  18. Transform Mirror
    2:42
  19. Offset
    3:42
  20. Polygon
    2:16
  21. Rotate
    2:07
  22. Transform
    3:09
  23. Translate 1
    2:47
  24. Translate 2
    2:39
  25. Trim
    3:56

Write a review


Guest


eddyeddy

0

  • 5
   4 of 5 members found this review helpful 4 / 5 members
Personally I found this course very very interesting, it served me so much,
Although I am not very gripped with the English language (school level).
It would be very useful to have the video files with the subscript with other languages. "in my case Italian" 
In general you did a nice job compliments

Share this review

Link to review
Gerrie

0

  • 5
   8 of 8 members found this review helpful 8 / 8 members

Excellent, I like to follow with the book and the video's are great. 

Share this review

Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...