Mastercam 2019 Mill Advanced eCourse

Buy Now

149.00 995.00

This eCourse is designed to provide the resources you need to become proficient with 3D geometry creation and toolpaths. If you are new to Mastercam, it is highly recommended that you start with Mill Essentials (book or eCourse) to build a firm foundation of 2D knowledge prior to exploring 3D.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 15 hours to complete.

All videos in this eCourse are Closed Captions

Introduction

Mastercam 2019 Workspace

8:29

Tutorial 1

Tutorial 1 covers Surface High Speed Area Roughing, Surface High Speed Horizontal, Surface High Speed Waterline toolpaths.
Wireframe Creation

5:45
Solid Creation

3:44
Machine Definition and Stock Setup

0:52
3D High Speed Area Roughing

6:29
3D High Speed Horizontal Area

3:36
Waterline to Finish the Walls

2:59
Post

0:50

Tutorial 2

Tutorial 2 covers Stock Model, Surface High Speed Area Roughing with Rest Material, Surface High Speed Radial, Surface Finish Blend, and Tool Transform Rotate.
Wireframe Creation

8:01
Solid Creation

7:22
Machine Definition and Stock Setup

1:05
Stock Model

0:55
Area Roughing

5:02
Stock Model After Roughing

0:40
Surface High Speed Radial

3:51
Blend

4:54
Toolpath Transform

1:56
Post

0:36

Tutorial 3

Tutorial 3 covers Surface High Speed Dynamic Optirough, Surface High Speed Dynamic Optirough with Rest Material, Stock Model, and Surface High Speed Hybrid.
Wireframe Creation

12:27
Solid Creation

11:01
Machine Definition and Stock Setup

0:40
Dynamic Optirough

3:43
Stock Model After Roughing

0:36
Dynamic Optirough with Rest Material

5:43
Stock Model After All Roughing Operations

0:42
Surface High Speed Hybrid

4:46
Post

0:40

Tutorial 4

Tutorial 4 covers Surface High Speed Area Roughing, Stock Model, Surface High Speed Scallop, Toolpath Transform Rotate, Surface High Speed Spiral, and Surface High Speed Waterline.
Geometry Creation - Part 1

11:49
Geometry Creation - Part 2

15:44
Machine Definition and Stock Setup

1:05
Surface High Speed Area Rough

3:49
Stock Model After Roughing

0:37
Scallop to Finish One Pocket

7:21
Toolpath Transform to Finish All Pockets

2:54
Stock Model After Finishing All Pockets

0:43
Finish the Top of the Part using Spiral

5:10
Finish the Walls Using Waterline

3:13
Post

1:25

Tutorial 5

Tutorial 5 covers Solid Extrude Create Body, Extrude Boss, Extrude Cut, Draft to Face, Constant Radius Fillet, Shell, 2D High Speed Dynamic Mill, Surface High Speed Dynamic OptiRough, Surface High Speed Hybrid, Surface High Speed Pencil, 2D High Speed Dynamic Contour.
Geometry Creation - Part 1

14:12
Geometry Creation - Part 2

4:04
Geometry Creation - Part 3

2:59
Machine Definition and Stock Setup

0:52
High Speed Dynamic Mill

2:53
Dynamic Optirough

3:52
Surface High Speed Hybrid

3:19
Surface High Speed Pencil

2:24
2D Dynamic Contour

3:12
Post

0:40

Tutorial 6

Tutorial 6 covers Surface commands such as Net, Loft, and Flat Boundary. Toolpaths such as 2D High Speed Dynamic OptiRough, Surface High Speed Scallop, Surface High Speed Pencil, Surface High Speed Project will be used.
Geometry Creation

6:58
Machine Definition and Stock Setup

0:45
2D Dynamic Mill

4:06
OptiRough

2:54
Scallop

2:23
Pencil

2:10
Project

3:29
Post

0:38

Exercises

Exercises
2 Surface Blend

0:55
3 Surface Blend

1:08
3 Fillet Blend

2:54
Create Curves

1:52
Draft and Extrude Surfaces

1:36
Dynamic Plane

4:01
Fence Surfaces

1:49
Net Surface 1

0:34
Net Surface 2

0:33
Net Surface 3

0:48
Net Surface 4

0:33
Plane by Entity

1:36
Plane by Normal

1:20
Primitives

1:34
Ruled and Lofted Surfaces

1:27
Ruled and Lofted Surfaces using Window Selection

0:54
Standard Construction Planes

3:11
Surface Fillet

2:02
Surfacing 1

0:52
Surfacing 2

0:31
Surfacing 3

1:04
Surfacing 5

2:06
Surfacing 7

0:55
Surfacing 8

0:39
Surfacing 9

0:51
Sweep Surface 1

0:49
Sweep Surface 2

1:14
Sweep Surface 3

0:50
Sweep Surface 4

3:28
Trim Surface to Curves

2:46
Trim Surface to Surface

1:50

Write a review

Your name
Rating Required

1 2 3 4 5
Comment Required
Click here

× Pasted as rich text.   Paste as plain text instead

Only 75 emoji are allowed.

× Your link has been automatically embedded.   Display as a link instead

× Your previous content has been restored.   Clear editor

× You cannot paste images directly. Upload or insert images from URL.

Insert image from URL
×

Desktop

Tablet

Phone

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.