Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam 2019 Multiaxis Essentials eCourse

Buy Now
149.00 995.00

The Mastercam 2019 Multiaxis Essentials eCourse is intended for the advanced Mastercam user looking to learn Mastercam Multiaxis programming. A firm grasp on both 2D and 3D machining is required and can be attained by completing the Mill Essentials and Mill Advanced Training Tutorials or eCourses.


The Multiaxis Essentials eCourse covers the different applications that are available by configuring the Rotary Axis Control page including: Rotary axis positioning and Axis substitution. It also covers the Multiaxis Classic family toolpaths: Rotary, Curve, Swarf, Flow, and Msurf. A special tutorial is dedicated to teaching how to drill and circle mill holes using Multiaxis toolpaths. Specific parameters such as Cut patterns, Tool Axis Control, Limits, Collision Control, Linking and more are described in detail.

The contents also describe how to verify the toolpaths using the new Machine Simulation module that combines toolpath backplot mode and material removal mode with collision detections.


Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 10 hours to complete.

Introduction
  1. Mastercam 2019 Workspace
    8:29
Tutorial 1

  1. Tutorial 1 covers Contour With Axis Substitution.

  2. Geometry Creation
    4:18
  3. Machine Definition and Stock Setup
    1:04
  4. Contour the Cylindrical Helix with Axis Substitution
    4:49
  5. Modify the Geometry
    0:58
  6. Contour the Conical Helix with Axis Substitition
    3:05
Tutorial 2

  1. Tutorial 2 covers Drilling With Axis Substitution and Rotary Axis Positioning & Transform Rotate toolapths.

  2. Open Geometry, Machine Definition, Stock Setup
    1:45
  3. Drill the 4 Holes with Axis Substitution
    2:49
  4. Drill the 8 Holes with Axis Substitution and Unroll Geometry
    1:47
  5. Engrave the Numbers
    3:19
  6. Contour the Slot
    2:40
  7. Toolpath Transform
    2:36
Tutorial 3

  1. Tutorial 3 covers Rolldie C-Hook.

  2. Open Geometry, Machine Definition, Stock Setup
    1:24
  3. Contour the Slot with Axis Substitution
    5:22
  4. Rolldie C-Hook
    7:33
Tutorial 4

  1. Tutorial 4 covers Contour Indexing Using Planes.

  2. Open File, Machine Definition, Stock Setup
    2:13
  3. Machine the Cutouts using Contour with Axis Substitution
    4:07
  4. Define a New Tool Plane and Drill
    3:08
  5. Drill the Remaining Holes using Toolpath Transform
    2:06
  6. Machine the Top Slot using Contour
    3:03
  7. Create a New Tool Plane and Machine the Large Slot using Contour
    2:60
Tutorial 5

  1. Tutorial 5 covers Rotary 4-Axis.

  2. Open File, Machine Definition, Stock Setup
    1:52
  3. Machine the Cams with Rotary Cut
    6:30
  4. Machine the Cams with Rotary using Axial Cut Method
    5:59
Tutorial 6

  1. Tutorial 6 covers Curve 5-Axis.

  2. Open File, Machine Definition, Stock Setup
    2:08
  3. Curve 5 Axis with Control to Point
    4:26
  4. Curve 5 Axis with Control from Point
    2:56
  5. Curve 5 Axis with Control by Plane
    3:33
  6. Curve 5 Axis with Control by Chain
    2:40
  7. Curve 5 Axis with Control to Lines
    2:57
Tutorial 7

  1. Tutorial 7 covers Swarf 5-Axis.

  2. Open File, Machine Definition, Stock Model
    3:16
  3. Swarf with Walls Defined by Chains
    5:06
  4. Swarf with Walls Defined by Surfaces
    2:10
Tutorial 8

  1. Tutorial 8 covers Drill & Circle Mill 5-Axis.

  2. Open File, Machine Definition, Stock Setup
    1:52
  3. Spot Drill and Drill the Three 1/2" Holes
    4:45
  4. Circle Mill the Large Holes
    5:21
Tutorial 9

  1. Tutorial 9 covers Flow 5-Axis.

  2. Open File, Machine Definition, Tool Settings
    1:32
  3. Flow 5 Axis to Finish One Blade
    4:23
  4. Machine Simulation
    2:07
  5. Flow 5 Axis to Point
    5:07
  6. Toolpath Transform to Finish the Remaining Blades
    1:33
Tutorial 10

  1. Tutorial 10 covers Multisurface 5-Axis.

  2. Open File, Machine Definition, Tool Settings
    1:42
  3. Multisurface
    5:41
  4. Machine Simulation
    1:03
  5. Multisurface with Control Boundary
    4:39

Write a review


Guest


TGilpin

2

  • 1
   0 of 5 members found this review helpful 0 / 5 members

 Why would you have the exact same tutorials for 18 to 19, show something different like how to rough out a PDC bit or something different.  Key word different!

Share this review

Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...