Mastercam 2019 Lathe eCourse
-
-
-
-
-
This eCourse is designed to familiarize you with the Mastercam user interface and provide the resources you need to become proficient with geometry creation and toolpaths for lathe applications. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, it will get you up-to-date and enhance your abilities.
Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 7 hours to complete.
-
Mastercam 2019 Workspace8:29
-
Tutorial 1 covers the Face, Roughing and Finish toolpaths.
-
Geometry Creation6:38
-
Machine Definition and Stock Setup4:11
-
Face4:15
-
Rough4:38
-
Finish2:10
-
Post1:32
-
Tutorial 2 covers Groove using Multiple Chains & Drilling toolpaths.
-
Geometry Creation6:47
-
Tool Settings and Stock Setup1:43
-
Face0:56
-
Rough2:26
-
Finish1:49
-
Groove6:09
-
Center Drill and Drill3:53
-
Post0:41
-
Tutorial 3 covers Canned Rough & Finish toolpaths, Groove at an angle, as well as Custom Tool & Cutoff toolpaths.
-
Import Geometry4:31
-
Machine Definition and Stock Setup1:55
-
Face0:49
-
Center Drill and Drill2:27
-
Canned Rough3:13
-
Canned Finish1:48
-
Rough the Outer Diameter3:51
-
Finish the Outer Diameter1:58
-
Machine the Vertical Groove4:36
-
Machine the Angled Groove4:42
-
Cutoff1:55
-
Post0:33
-
Tutorial 4 covers ID Rough, Finish & Groove toolpaths.
-
Geometry Creation4:32
-
Machine Definition and Stock Setup1:39
-
Face0:44
-
Rough the Outer Diameter2:06
-
Finish the Outer Diameter1:27
-
Center Drill1:32
-
Drill1:37
-
Rough the Inner Diameter1:56
-
Finish the Inner Diameter1:47
-
Groove the Inner Diameter3:20
-
Cutoff1:36
-
Post0:29
-
Tutorial 5 covers the Thread toolpath and Stock Flip.
-
Geometry Creation8:28
-
Stock Setup1:51
-
Face0:39
-
Rough the Outer Diameter1:55
-
Finish the Outer Diameter1:21
-
Machine the 12 - 13 UNC Relief Groove2:08
-
Machine the 12 - 13 UNC Thread1:53
-
Center Drill and Drill2:10
-
Stock Flip1:43
-
Face the Flipped Part0:36
-
Rough the Flipped Part Outer Diameter1:15
-
Finish the Flipped Part Outer Diameter0:42
-
Groove the Flipped Part2:25
-
Machine the 5/8 - 18 UNF Thread2:10
-
Center Drill and Drill the Flipped Part2:15
-
Post0:34
-
Tutorial 6 includes Stock Advance and Lathe Tailstock operations.
-
Geometry Creation10:17
-
Machine Definition and Stock Setup1:47
-
Face0:45
-
Rough1:44
-
Finish the Part with Downcutting2:39
-
Machine the Relief Grooves2:10
-
Machine the 12 - 13 UNC Thread2:20
-
Machine the 1 - 12 UNF Thread1:54
-
Center Drill and Drill1:18
-
Advance Stock and Tailstock0:57
-
Machine the Grooves of the Advanced Part3:38
-
Cutoff1:09
-
Post0:33
-
Tutorial 7 covers machining a part in a Vertical Turret Lathe (VTL machine). We will bring in a part from SolidWorks and manipulate the geometry appropriately within Mastercam.
-
Import Geometry2:25
-
Add Machine Definition and Stock Setup4:16
-
Face0:40
-
Rough the Outer Diameter1:39
-
Finish the Outer Diameter1:04
-
Center Drill and Drill4:21
-
Rough and Finish the Inner Diameter2:60
-
Machine the Grooves3:39
-
Thread the Outer Diameter2:48
-
Post0:36
-
Exercises
-
Analyze Chains4:48
-
Analyze Commands2:45
-
Arc Tangent2:15
-
Attributes and Levels6:21
-
Break Commands1:32
-
Chaining Options3:07
-
Chamfer Entities and Chamfer Chain3:18
-
Create Arcs2:09
-
Create Lines2:49
-
Create Point Position2:23
-
Create Rectangles2:24
-
Join Entities1:46
-
Mirror2:02
-
Transform Offset2:46
-
Transform Translate1:60
-
Trim1:32