Mastercam 2020 Mill Essentials eCourse

Buy Now

149.00 995.00

This course is designed to familiarize you with the Mastercam user interface (UI) and provide the resources you need to become proficient with 2D geometry creation and toolpaths. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, (perhaps an older version) it will get you up-to-date and enhance your abilities.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 13 hours to complete.

All videos in the eCourse are Closed Captioned

Introduction

Mastercam 2020 Getting Started

15:52

Tutorial 1

Tutorial 1 covers Facing, Circle Mill, Contour, Spot Drill, and Drill Toolpaths.
1. Introduction

1:21
2. Create Wireframe

3:30
3. Machine Definition and Stock Setup

1:35
4. Face

2:48
5. Circle Mill the Large Hole

5:37
6. Circle Mill the Inner Hole

3:17
7. Spot Drill 4 Holes

3:27
8. Drill the 4 Holes

2:09
9. Chamfer the Outer Circle

4:41
10. Chamfer the Corners

3:12
11. Post

1:11

Tutorial 2

Tutorial 2 covers Multiple Setups, Slot Mill, Pocket, 2D High Speed Dynamic Mill, and Contour Toolpaths
1. Introduction

1:27
2. Create Wireframe

8:14
3. Machine Definition and Stock Setup

1:15
4. Slot Mill

4:28
5. Pocket Toolpath

2:36
6. 2D High Speed Dynamic Contour to Finish the Pockets

2:22
7. Dynamic Mill to Rough the Outside Profile

4:01
8. Contour to Finish the Outside Profile

2:02
9. Create a New Toolpath Group and Change the WCS

3:07
10. Face the Bottom of the Part

2:41
11. Post

0:48

Tutorial 3

Tutorial 3 covers 2D High Speed Area Mill, 2D High Speed Dynamic Mill, Pocket, Pocket Remachining Toolpaths
1. Introduction

1:20
2. Wireframe Creation

9:42
3. Solid Creation

3:49
4. Machine Definition and Stock Setup

1:16
5. 2D High Speed Area Mill the Boss

5:23
6. Pocket Toolpath Leaving the Letters as Islands

3:56
7. Pocket Remachining

2:21
8. 2D High Speed Dynamic Mill the Outside Profile

2:12
9. 2D High Speed Dynamic Mill the Open Pockets

2:58
10. Post

0:43

Tutorial 4

Tutorial 4 covers 2D HS Dynamic Mill, Contour, Area Mill, and Toolpath Transform
1. Introduction

1:48
2. Wireframe Creation

13:25
3. Solid Creation

4:21
4. Machine Definition and Stock Setup

0:51
5. 2D High Speed Dynamic Mill the Steps

4:19
6. Contour to Finish the Steps

2:40
7. Area Mill One Pocket

3:43
8. Toolpath Transform - Rotate to Finish the Remaining Pockets

1:32
9. Contour to Finish the Pocket Walls

2:37
10. Spot Drill the Holes

2:26
11. Drill the Holes

2:10
12. Chamfer the Outer Diameter

2:13
13. Chamfer the Top of the Pockets

2:30
14. Change the WCS to Machine the Bottom

1:36
15. Area Mill the Bottom

2:45
16. Contour to Finish the Bottom Walls

2:40
17. Post

0:38

Tutorial 5

Tutorial 5 covers Multiple Setups, 2D High Speed Area Mill, Rest Mill, Spot Drill, Drill, Tap, Counterbore, and Slot Mill
1. Introduction

1:01
2. Open the Geometry File

1:02
3. Machine Definition and Stock Setup

0:52
4. Area Mill the Upper Pocket

2:52
5. Area Mill the Lower Pocket

2:54
6. Remachine the Pockets

2:20
7. Spot Drill the 9/16 Tap Holes

2:29
8. Drill the Through Holes

1:59
9. Tap the Four Holes

1:54
10. Change the WCS to Front

1:19
11. Spot Drill the Front Tap Holes

3:32
12. Tap the Front Holes

1:39
13. Drill the 1/2 Inch Hole

1:44
14. Counterbore the 1/2 Inch Hole

2:05
15. Change the WCS to Left

0:43
16. Slot Mill

2:30
17. Post

0:38

Tutorial 6

Tutorial 6 covers High Speed Dynamic Mill, 2D High Speed Area Mill, 2D High Speed Blend Mill, and 2D High Speed Peel Mill Toolpaths.
1. Introduction

1:04
2. Wireframe Creation

6:49
3. Machine Definition and Stock Setup

0:45
4. Dynamic Mill the Outside Profile

3:31
5. Area Mill the Step

2:26
6. Blend Mill the Step

2:19
7. Peel Mill the First Slot

1:56
8. Peel Mill the Second Slot

1:47
9. Post

0:29

Tutorial 7

Tutorial 7 covers 2D High Speed Dynamic Mill, FBM Drill, Dynamic Mill, Pocket, and Contour Toolpaths
1. Introduction

1:11
2. Create Wireframe

6:43
3. Create Solids

2:35
4. Machine Definition and Stock Setup

0:46
5. Dynamic Mill the Pockets

3:12
6. FBM Drill

3:07
7. Dynamic Mill the Outside Profile

2:37
8. Finish the Pockets with a Pocket Toolpath

2:23
9. Contour to Finish the Outside Profile

1:55
10. Post

0:25

Exercises

Exercises
Analyze Chains

5:39
Analyze Commands

5:17
Break

1:34
Chaining

5:38
Create Arc Tangent

1:44
Create Arcs

2:44
Create Fillet

1:34
Create Line Tangent

1:11
Create Lines

2:59
Create Point Position

2:03
Create Rectangle

2:12
Managing Attributes and Levels

2:39
Transform - Mirror

1:51
Transform - Offset

2:43
Transform - Rotate

1:32
Transform - Translate

1:59
Trim

2:29

Write a review

Your name
Rating Required

1 2 3 4 5
Comment Required
Click here

× Pasted as rich text.   Paste as plain text instead

Only 75 emoji are allowed.

× Your link has been automatically embedded.   Display as a link instead

× Your previous content has been restored.   Clear editor

× You cannot paste images directly. Upload or insert images from URL.

Insert image from URL
×

Desktop

Tablet

Phone

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.