Mastercam 2020 Lathe eCourse

Buy Now
149.00 995.00

This eCourse is designed to familiarize you with the Mastercam user interface and provide the resources you need to become proficient with geometry creation and toolpaths for lathe applications. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, it will get you up-to-date and enhance your abilities.

 

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 7 hours to complete.

Introduction
  1. Mastercam 2020 Getting Started
    15:52
Tutorial 1
  1. Tutorial 1 covers the Face, Roughing and Finish toolpaths.

  2. 1. Introduction
    1:05
  3. 2. Geometry Creation
    4:43
  4. 3. Machine Definition and Stock Setup
    2:53
  5. 4. Face
    1:26
  6. 5. Rough
    2:14
  7. 6. Finish
    1:25
  8. 7. Post
    0:43
Tutorial 2
  1. Tutorial 2 covers Groove using Multiple Chains & Drilling toolpaths.

  2. 1. Intro
    0:58
  3. 2. Geometry Creation
    5:49
  4. 3. Machine Definition and Stock Setup
    2:14
  5. 4. Face
    1:02
  6. 5. Rough the Outer Diameter
    1:48
  7. 6. Finish the Outer Diameter
    1:29
  8. 7. Groove Using Multiple Chains
    2:41
  9. 8. Center Drill and Drill
    2:49
  10. 9. Post
    0:32
Tutorial 3
  1. Tutorial 3 covers Canned Rough & Finish toolpaths, Groove at an angle, as well as Custom Tool & Cutoff toolpaths. 

  2. 1. Intro and Open Geometry
    3:08
  3. 2. Machine Definition and Stock Setup
    2:19
  4. 3. Face
    0:48
  5. 4. Center Drill
    1:12
  6. 5. Drill
    1:16
  7. 6. Rough the Inner Diameter Using Canned Rough
    3:14
  8. 7. Finish the Inner Diameter Using Canned Finish
    1:45
  9. 8. Rough the Outer Diameter
    4:28
  10. 9. Finish the Outer Diameter
    2:15
  11. 10. Vertical Groove
    5:33
  12. 11. Angled Groove
    4:43
  13. 12. Cutoff
    2:06
  14. 13. Post
    0:28
Tutorial 4
  1. Tutorial 4 covers ID Rough, Finish & Groove toolpaths. 

  2. 1. Intro
    1:02
  3. 2. Geometry Creation
    3:29
  4. 3. Machine Definition and Stock Setup
    2:11
  5. 4. Face
    0:33
  6. 5. Rough the Outer Diameter
    1:45
  7. 6. Finish the Outer Diameter
    1:21
  8. 7. Center Drill
    1:12
  9. 8. Drill
    1:26
  10. 9. Rough the Inner Diameter
    1:52
  11. 10. Finish the Inner Diameter
    1:33
  12. 11. Groove the Inner Diameter
    3:26
  13. 12. Cutoff
    1:44
  14. 13. Post
    0:26
Tutorial 5
  1. Tutorial 5 covers the Thread toolpath and Stock Flip. 

  2. 1. Intro
    1:23
  3. 2. Geometry Creation
    7:27
  4. 3. Machine Definition and Stock Setup
    2:02
  5. 4. Face
    0:30
  6. 5. Rough the Outer Diameter
    1:37
  7. 6. Finish the Outer Diameter
    1:34
  8. 7. Machine the 1/2 - 13 UNC Relief Groove
    2:13
  9. 8. Machine the 1/2 - 13 UNC Thread
    2:32
  10. 9. Center Drill and Drill
    2:48
  11. 10. Stock Flip
    1:10
  12. 11. Face the Flipped Part
    0:46
  13. 12. Rough the Outer Diameter of the Flipped Part
    1:05
  14. 13. Finish the Outer Diameter of the Flipped Part
    1:21
  15. 14. Machine the Grooves of the Flipped Part
    2:24
  16. 15. Machine the 5/8 - 18 UNF Thread
    2:19
  17. 16. Center Drill and Drill the Flipped Part
    2:22
  18. 17. Post
    0:26
Tutorial 6
  1. Tutorial 6 includes Stock Advance and Lathe Tailstock operations. 

  2. 1. Intro
    1:15
  3. 2. Geometry Creation
    8:35
  4. 3. Machine Definition and Stock Setup
    2:28
  5. 4. Face
    0:44
  6. 5. Rough
    1:18
  7. 6. Finish with Downcutting
    2:53
  8. 7. Machine the Relief Grooves
    2:05
  9. 8. Machine the 1/2 - 13 UNC Thread
    1:59
  10. 9. Machine the 1 - 12 UNF Thread
    1:37
  11. 10. Center Drill
    0:45
  12. 11. Stock Advance and Advance Tailstock
    0:56
  13. 12. Machine the Grooves
    3:37
  14. 13. Cutoff
    1:08
  15. 14. Post
    0:29
Tutorial 7
  1. Tutorial 7 covers machining a part in a Vertical Turret Lathe (VTL machine). We will bring in a part from SolidWorks and manipulate the geometry appropriately within Mastercam. 

  2. 1. Intro
    1:07
  3. 2. Import Geometry
    1:38
  4. 3. Add VTL Machine Definition and Stock Setup
    4:32
  5. 4. Face
    0:24
  6. 5. Rough the OD
    1:20
  7. 6. Finish the OD
    0:52
  8. 7. Center Drill and Drill
    3:27
  9. 8. Rough and Finish the ID
    2:17
  10. 9. Machine the ID Grooves
    2:34
  11. 10. Machine the OD Thread
    2:07
  12. 11. Post
    0:23
Exercises
  1. Exercises

  2. 1. Analyze Chains
    5:39
  3. 2. Analyze Commands
    5:17
  4. 3. Break
    1:34
  5. 4. Chaining
    5:38
  6. 5. Chamfer Entities and Chamfer Chain
    3:02
  7. 6. Create Arc Tangent
    1:44
  8. 7. Create Arcs
    2:44
  9. 8. Create Fillet
    1:34
  10. 9. Create Line Tangent
    1:11
  11. 10. Create Lines
    2:59
  12. 11. Create Point Position
    2:03
  13. 12. Create Rectangle
    2:12
  14. 13. Join
    1:60
  15. 14. Managing Attributes and Levels
    2:39
  16. 15. Transform - Mirror
    1:51
  17. 16. Transform - Offset
    2:43
  18. 17. Transform - Rotate
    1:32
  19. 18 - Transform - Translate
    1:59
  20. 19. Trim
    2:29

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us